• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Recent content by roundhouse

  1. R

    What is the absolute lowest rise intake for a 351?

    My 74 351 had a stock van two barrel manifold and it fit under the hood with the stock bronco air cleaner
  2. R

    NV-3500 needle bearings ? Where to buy ?

    Rebuilding the NV-3500 the plastic cage for the second gear needle bearing is melted I Can’t find em anywhere .
  3. R

    I'm looking for build threads with extensive/detailed Metal replacement.

    As for lining all back up You have to start at the rear of the door to the quarter panel gap Since the quarter panel is fixed and can’t be adjusted I’d suggest hanging the door on the A pillar and using a floor Jack under the door , easy to do with the rocker panels missing , using some...
  4. R

    351w Fuel Injection Conversion

    The manifold from a 74 ish van will fit with the atock Bronco air cleaner but the van manifold are all for Two Barrel carbs
  5. R

    351w Fuel Injection Conversion

    Good info here I have a 351w roller engine from a 96 van One owner about 100k on the van
  6. R

    BAT Craziness

    Once the owner and founder sold it to a private equity investor, I knew BaT would go down the drain Hell now they are listing Chrysler minivans and Honda civics
  7. R

    Hodaka motorcycle ad

    I think that’s the racks that hang on the bumper Back when cars and pickups had actual bumpers When I was a kid we had a rack like that to haul my Honda Trail 90 on the back bumper of my fathers 74 Chevy Caprice Convertible That way we could still tow a boat and carry the bike We tried...
  8. R

    Master list of non-stock front seat options - what do you use?

    I have Seats from an early Miata in mine Well they were in it , now they’re up on a shelf while the floors rockers and hinge posts and kick panels get replaced
  9. R

    Master list of non-stock front seat options - what do you use?

    Friend of mine has a 70 or 71 Torino fastback on his farm with a tree forging through it He wrecked it in 1982 Still has the high back buckets , factory tach , factory shaker scoop etc And a boss 351 from whatever they came in All of it ruined from sitting in the woods for 40 years Has a...
  10. R

    The Bronco has landed and she’s rusty. Lots of sheetmetal work in my future…

    How’s the door hinge posts ? That’s the hardest part The floor is easy breezy compared to the door hinge post
  11. R

    NV3550 Won't Shift into Gear

    I do have a a 3550 I didn’t have any issues with it I had to get a different flywheel etc because I have a efi 5.0
  12. R

    NV3550 Won't Shift into Gear

    Any updates ?
  13. R

    NV3550 Internal upgrades?

    I’ve banged on my 3550 for years with a stock 1990 efi 5.0 from a mustang , with 4.11 axles and 35 inch tires It finally started popping out of first gear But alot of 3550s did that in the wranglers with the six cylinder .
  14. R

    Power Limitations of RAT/RAN Transmission

    I ran a stock 351w and the stock 3 speed for years . Had the shifter on the column for a couple of years then got the James Duff floor shifter Adding power steering and the floor shifter made it feel like a sports car
  15. R

    Anyone ever see door post repairs like this ?

    It “wood” last longer than the origional rocker My truck is a 74 and The factory one was repaired with rolled up paper and bondo between 1990 and 1992 and I assume the hinge posts were replaced with the 3/8 steel plate at the same Time . the DSO for my truck was Jacksonville Florida so...
Top