• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

how should I clean up my slots?

hmh800

Sr. Member
Joined
Nov 5, 2009
Messages
365
I bought these slots off of CB (sorry forget who but thanks!). They are fairly clean but have some oxidation on them. I am not going after a mirror shine, but would like to clean them up to more of a matte finish. Any suggestions? Not sure if chemicals, abrasion, or rouges would be best.
THanks.
 

Attachments

  • IMG_1664_1_1_1.jpg
    IMG_1664_1_1_1.jpg
    84.4 KB · Views: 40
  • IMG_1665_2_1_1.jpg
    IMG_1665_2_1_1.jpg
    94.9 KB · Views: 35

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
SEND them to mike at polishmywheels.com.......you will NOT be disappointed!
 

Attachments

  • byob IV 035.jpg
    byob IV 035.jpg
    123.1 KB · Views: 61
OP
OP
H

hmh800

Sr. Member
Joined
Nov 5, 2009
Messages
365
I thought about that, but from what I've seen they look SO shiny that they lose some of that classic look IMO. He sure does good work though, and reasonable.
 

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
If you start polishing the wheel its going to be difficult to get the same finish over the entire surface in my opinion. Some sections might have more shine than others.
 

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Sand blast and powdercoat what ever shade of silver you want. Never have to polish and it's very hard to chip if done correctly. Or, you can media blast them and clearcoat them, or have them clear powder coated.
 
OP
OP
H

hmh800

Sr. Member
Joined
Nov 5, 2009
Messages
365
By the way, Tasker, nice ride! I grew up in the Seacoast and don't remember EVER seeing an Early Bronco on the roads. I had a '71 CJ5- what a rustbucket!
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
thanks.....been a long time coming and still a long way to go. New England has a healthy metal appetite!
 

cbford

Jr. Member
Joined
Mar 30, 2005
Messages
77
I used an electric orbital sander on mine with 400 and then 600 grit paper. Then I used aluminum polish with one of those magic ball tings for your drill. not too hard, worked great, very consistent results.
 
OP
OP
H

hmh800

Sr. Member
Joined
Nov 5, 2009
Messages
365
Yeah, those pics are of the cleanest one, but it's the only one I have here. The others have more oxidation.
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
Mine were bad when I got them, so I had them soda blasted. After that I handed my grandson a bag of fine steel wool and now they have the original "old school look".
Steve
 

Attachments

  • 002.jpg
    002.jpg
    123.8 KB · Views: 74

Stroppe-Envy-77

Bronco Guru
Joined
Jun 15, 2009
Messages
1,011
I used Eastwood's wheel polishing kit, which has regular and cone-shaped buffing pads and two different compounds of rouge. I think it was about $30 or so and worked great, though their buffing pads threw off a lot of little bits of fibers. (That's what a Shop Vac is for, right?)

The end result was what I think you're after. Got rid of the oxidation but didn't "bling up" the factory semi-shiny finish.
 

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
wet sand with 1000 grit, polish with mag and aluminum polish. works great.

IMG_1294small.JPG
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,361
polishmywheels has some polish that should work great.
 
OP
OP
H

hmh800

Sr. Member
Joined
Nov 5, 2009
Messages
365
Bigjhoov- how long did each wheel take you? What a difference! I cleaned up some curb rash on a couple of mine last night with a flat file followed by emery cloth- worked well. I think I'm going to go the soda blast route at this point, I just need to find a place to do it down in Denver. Any suggestions?
 

W650Mike

Sr. Member
Joined
May 5, 2009
Messages
528
Loc.
Eastland, Texas
File out the edge nicks, sand as suggested, Diamond Brite Truck Box Polish (from Lowes), Power-Ball and Cone…and lots of elbow grease and beer! My next go-around will be sent to Polish My Wheels.

Tasker’s wheels are illegally shiney in the southern states.;)
 

Attachments

  • camera 008 (Medium).jpg
    camera 008 (Medium).jpg
    76.8 KB · Views: 45
  • camera 001 (Medium).jpg
    camera 001 (Medium).jpg
    61.2 KB · Views: 42

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
Tasker’s wheels are illegally shiney in the southern states.



been as south as Virginia, that count? ;D:cool:
 
Top