• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Seatbelt Tabs on Roll Cage

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
I bought some double-shear tabs to weld to my cage and wondered if anyone had some pictures of where they mounted theirs? I know I'll need to adjust the height to fit us, but position on the tube is what I want to see. I found where someone mounted them parallel with the quarter panel, but can't find any pics of them mounted directly behind the driver's left shoulder on the inside of the cage. Benefits and drawbacks for either way would be helpful as well. Thanks in advance.

Chuck
 

graniteguy

Full Member
Joined
Feb 9, 2012
Messages
281
Loc.
Kempner, TX
those bungs look cool. I drilled a hole in the roll cage, then welded in a tube all the way through. This allowed a bolt all the way through but the welded tube kept the cage from collapsing. Basically that bung but no threads in it.

This was on another vehicle. I got shoulder belts for the bronco but haven't installed them yet.
 
OP
OP
Chief Master Sergeant

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
I'm mounting 3-point retractable harnesses. Thanks for the website! I would still like to see how folks used tabs though, as I have them sitting here and want to drive this thing.

graniteguy, do you recall what size tubing you welded in? My cage is 1.75" DOM.
 

D ROCK

Sr. Member
Joined
Feb 11, 2005
Messages
393
I have one of moab mike's cages from complete offroad. It has a nut welded on the cage for the shoulder harness for a 3 point belt. Works good.:cool:
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
I've got one of Mike's cages here how I did mine. First pic is my 2-piece door latch second is the shoulder belt, they're adjustable up and down and around.
Steve
 

Attachments

  • 2piecedoorlatch.jpg
    2piecedoorlatch.jpg
    78.7 KB · Views: 270
  • seatbeltclamp.jpg
    seatbeltclamp.jpg
    70.3 KB · Views: 236

graniteguy

Full Member
Joined
Feb 9, 2012
Messages
281
Loc.
Kempner, TX
Chief. I took the bolt I was gonna use and went to the metal section at Lowes and got the metal tube that fit the tightest over the bolt. I drilled/grinded a hole in the cage until the tube went all the way through. Then I welded it and cut/ground the tube flush to the roll cage.

I suppose you could do two and try them both for comfort.
 

sellitall

Bronco Guru
Joined
Jul 30, 2002
Messages
1,444
Loc.
Malvern, Pennsylva
I've got one of Mike's cages here how I did mine. First pic is my 2-piece door latch second is the shoulder belt, they're adjustable up and down and around.
Steve

I would come up with a "stronger" plan with that setup. It's cool that you have a cage, but they become vegetable makers once the seat belt mount breaks or the knotted seatbelt snaps.

Is the second pic a pitman arm????
 

Attachments

  • dangerwillrobinson.jpg
    dangerwillrobinson.jpg
    25 KB · Views: 137

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
I've got one of Mike's cages here how I did mine. First pic is my 2-piece door latch second is the shoulder belt, they're adjustable up and down and around.
Steve
Are those intended for seatbelts? What's to stop them from traveling along the tube in an accident, just clamping pressure?
 
Top