What is this steering shaft from?

[BigB]

Hi All

I got this collapsible shaft when I picked up my steering boxes to do a 4x4x2 box. I'm guessing it came from the F150 box and not the 78 Bronco. Just can't remember what year it came from.

I'm hoping to use this shaft from the box to column,either cutting my 69 column or a shorter column from a 66 Fairlane.

Unfortunately I didn't get the joint to fit the rectangular end and it's not a double d so I'm stumped for where to look or what to do.

I know a bronco guru will have the info I seek!

Thanks

 

[sykanr0ng]

On the part past the end you are asking about looks like the double D.

 

[BigB]

Thanks for the quick reply. I took some close ups as it doesn't look like a "d" to me!

 

[BigB]

I hope that shows it better.Each side is square/flat.

 

[BigB]

It measures 5/8 x 9/16 across the flats.

 

[BigB]

Found some photos on ebay and it appears to be from a 92-95 F150.

It's missing another uni joint that joins to that rectangular end. Hoping I can source one of them somewhere.

 

[BigB]

Rockauto $160!

At that price I would be better off just getting another shaft. Unless someone has one floating around...