6R80/D20 twin stick

[77BroncoWag]

I have been told that the twin stick i have on my D20 C4 wont work for my D20/6r80 swap. I see Wildhorses sells on for this swap but only for the T pattern mine is the J. Can mine be modified or do I need to find one that works for the new swap?

 

[Dfroman]

that is correct, I got mine from JB fab
https://jb-custom-fabrication.myshopify.com/

 

[JB Fab]

That is correct, due to the clocking position of the D20 in the 6R80/10R80 application, the flags on the "J" type are at an angle that makes the "J" type slotted interface even worse. Wild Horses can also supply you with our pre-modified stainless steel shift-rails to turn your "J" type to a "T" type that will allow you to use the spherical rod-end linkages supplied with our EB20T Type-6 shifter

 

[77BroncoWag]

That is correct, due to the clocking position of the D20 in the 6R80/10R80 application, the flags on the "J" type are at an angle that makes the "J" type slotted interface even worse. Wild Horses can also supply you with our pre-modified stainless steel shift-rails to turn your "J" type to a "T" type that will allow you to use the spherical rod-end linkages supplied with our EB20T Type-6 shifter

can you send me all the part numbers so i can send to WH?

 

[JB Fab]

Not sure what WH uses as their part numbers but they should be able to reference ours.

Shifter kit: EB20T T-6
Shift-rail kit: SRD20F
Interlock pill: D20FINTPILL (you need an extra 'pill' to convert a J to a T)

 

[77BroncoWag]

Not sure what WH uses as their part numbers but they should be able to reference ours.

Shifter kit: EB20T T-6
Shift-rail kit: SRD20F
Interlock pill: D20FINTPILL (you need an extra 'pill' to convert a J to a T)

thanks guys

 

[sprdv1]

that is correct, I got mine from JB fab
https://jb-custom-fabrication.myshopify.com/

Great vendor with great mods for our rigs