Rampage soft top bracket

[Super Duck]

Hey everyone, I've been a member for a long time. I have gotten a lot of information from all of you. I recently bought a used rampage top and when I got it home I realized that it was missing the two brackets that mount to the windshield riser that the door frames attach to. I got no response from the seller so I figured I would make my own. Can anyone get some measurements for me please. I've searched for replacement brackets but no luck. Thank you in advance.

 

[Super Duck]

I basically need the measurement from the bottom of the bracket to the center of the hole that the door frame goes into.

 

[Super D 73]

I'll get you a pic and measurement tomorrow just put 1/2. cab on mine had newer rampage top

 

[Super D 73]

here's a picture of the brackets, they are left and right. Looks like they took a piece of 2-in flat stock and bent it in half. The 3/8 holes for the rod are one half inch up and the slots are 3/8 also. These came off my Rampage top

 

[Super Duck]

Thank you. I really appreciate it. Another project on its way.

 

[Super D 73]

Looks like they would be easy to make out of a piece of light gauge1 inch angle little bit of cutting and trimming and drilling

 

[Ether]

This is perfect, I just got a rampage top missing only these two pieces also! Thanks CB


Sent from my iPhone using Tapatalk

 

[ERT]

Does anyone have any rampage soft top parts from a new or used top they aren’t using? I have a rampage soft top that was never installed and moved multiple times. Unfortunately over the years the box had been damaged and a few parts are missing. Pretty sure my ex wife thought there were just scrap and threw them away. I need both door headers and the price that attaches to the tailgate to snap the top too. Unfortunately rampage doesn’t sale parts. Thanks