Ford Safety Compliance Label location on the B pillar

[Mikemairs]

Hi all,
Looking for measurements and/or a picture of where the 'Safety Compliance' label goes on the 'B' pillar. I didn't have one when I got the Bronco and I just got done with body/paint on my '72.
Thanks in advance.

 

[JGbronc]

Here’s a couple pics. As far as measurements, I wouldn’t worry about being exact because Ford certainly wasn’t. Some are a tad higher, some a little lower. I’ve even seen them completely sideways.

 

[Mikemairs]

Here’s a couple pics. As far as measurements, I wouldn’t worry about being exact because Ford certainly wasn’t. Some are a tad higher, some a little lower. I’ve even seen them completely sideways.

That sounds good to me. Thank you for the pictures. As always, this forum doesn't disappoint.
Thanks, JGbronc

 

[JGbronc]

That sounds good to me. Thank you for the pictures. As always, this forum doesn't disappoint.
Thanks, JGbronc

No problem! Great looking Bronco!

 

[AZ73]

Sorry, but this was before I repainted so I don't have the measurements. I eyeballed it to put the replacement one in.
As a side note When I ordered my replacement from Marti, they sent me a blue one. I sent them the picture and asked if they could do it in white. They said it was done in both colors and mine might have faded. If you haven't ordered yours yet and you're going for stock, you might want to ask around and see if there was a difference.