Gas pedal for EFI?

[bert]

Do any of you have any photos you could post of how you converted your gas pedal to work with an EFI conversion?

I did save the gas pedal and cable from the donor mustang. Will this stuff work?

I saved everything related to the engine. Computer, wire harness, sensors, even the charcoal canister and related valves.

Thanks to everyone on this forum for sharing their ideas, experiences, and links to other sites for information. This has to be the number 1 site for EB's.

 

[jr]

http://www.broncoholics.com/support/topic.asp?TOPIC_ID=55

 

[Trigger]

I used a Lokar Mustang EFI throttle cable, I drilled out the spot weld that kept the ball on my original gas pedal that the original linkage hooks to, The new Lokar cable has a clevis type pin ( I don't know the technical term) and two e clips, the clevis fit nicely in the newly drilled hole in my pedal. The new cable has two nuts that sandwich the firewall, I had to use a washer that I cut a slit into that let it slide over the cable to allow the nuts to tighten up against as the existing hole was larger. The setup works great, and is really easy to set up.
Trigger

 

[66horse]

I just did mine today and followed this article

http://www.broncofix.com/Tech/sefi/sefi.htm

Works but the throttle is mighty touchy!