• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What's up with this picture? Astro Hydroboost install, Pics of how I did it.

OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
I'd like to know if anyone has followed this mod or in the process of doing so.

Please let me know what you think and fire away if you have questions.

I LOVE my set-up.......................

Braking is Awesome plus it gives me all the room for the next mill.....
 

RFR2212

Full Member
Joined
Nov 26, 2005
Messages
158
Loc.
Chicago Burbs
PM says they're still full... so here's what my PM was...

from previous threads and the most recent hboost question, i'm holding off till i can take care of the hboost setup to complete my hboost/disk swap. I've got a complete astro setup, hboost, m/c and prop valve, year unsure but it is very clean and looks relatively new. I want to use it all, if truely cost effective. Do I just need to get hoses to match and I'm set? Also is it necessary to run a p/s cooler? It's not a big deal, just another expense. I've found a local company to make my p/s lines, so that shouldn't be too bad. So i ask, can I get lines made for both p/s and brakes and this will work?
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
RFR2212 said:
PM says they're still full... so here's what my PM was...

from previous threads and the most recent hboost question, i'm holding off till i can take care of the hboost setup to complete my hboost/disk swap. I've got a complete astro setup, hboost, m/c and prop valve, year unsure but it is very clean and looks relatively new. I want to use it all, if truely cost effective. Do I just need to get hoses to match and I'm set? Also is it necessary to run a p/s cooler? It's not a big deal, just another expense. I've found a local company to make my p/s lines, so that shouldn't be too bad. So i ask, can I get lines made for both p/s and brakes and this will work?
Sorry dude, I dump some PMs this morning to make space but I guess alot of people are trying to get ahold of me............

My response to your question, "Will it work?"
Of course it will and if it doesn't, You will have to make it work....

Stock Astro lines or custom made lines, Your flavor, your choice, your expense. In the end it will all work.
 

RFR2212

Full Member
Joined
Nov 26, 2005
Messages
158
Loc.
Chicago Burbs
Well I guess i'll give it a shot. Also, what about the p/s cooler? I ask, as that's just more money to spend, and if unnecessary, i buy one.
 

strider

Full Member
Joined
Apr 14, 2002
Messages
228
Loc.
Holland
Why did you bother to angle your hydroboost toward the fender?

I am moving mine in much the same way (Lincoln hydro, not Astro) and while its not even bolted in yet, it looks like it will be perfect coming straight out of the firewall. Am I going to run into something strange?
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
strider said:
Why did you bother to angle your hydroboost toward the fender?

To make room for the 393Clevor mill......;D

Try adjusting valves on a Cleveland head with the MC in the way..............%)
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
slcpunk said:
if I ran the booster right out of the firwall with no agle bracket would it get in the way of my 351w efi?
I believe toddz has answered this question in another thread....

I think you will need to rotate the unit 180 degrees for it to work, but I'm not sure...

Someone knows.. Please chime in..
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,223
Madgyver said:
I believe toddz has answered this question in another thread....

I think you will need to rotate the unit 180 degrees for it to work, but I'm not sure...

Someone knows.. Please chime in..

Lot of variables here, but yes, if you come straight out of the firewall at/or near the stock master/pushrod hole, you'll run into problems. 180 deg. rotation is just a start. Additional questions - do you have a body lift? Do you have 351 tall valve covers?

Todd Z.
 

slcpunk

Sr. Member
Joined
Feb 4, 2006
Messages
419
Loc.
The WB, UTAH
well I am doing a 2" body lift and I plan on doing roller rockers so I guess I will have to do atleast remotely tall valve covers.
I am doing efi so my main concern is the plenum
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,223
slcpunk said:
well I am doing a 2" body lift and I plan on doing roller rockers so I guess I will have to do atleast remotely tall valve covers.
I am doing efi so my main concern is the plenum

Body lift helps with the valve covers, for sure. Plenum is the main concern - I think it would hit in the mounting position I'm thinking of.

Todd Z.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
here are some shots of my setup. stock 5.0 from a crown vic with the upper intake rotated 180. 1 inch plenum spacer to clear the fuel pressure regulator. this is also with a 2" body lift. no way would mine fit in the stock hole without angling it out towards the driver wheel well. here is a shot of the bracket i made from the original mounting plate.
 

Attachments

  • bronco 9-05 002.jpg
    bronco 9-05 002.jpg
    86 KB · Views: 506
  • hb1.jpg
    hb1.jpg
    85.8 KB · Views: 361

slcpunk

Sr. Member
Joined
Feb 4, 2006
Messages
419
Loc.
The WB, UTAH
thanks for the help guys. I have an idea that my dad and I came up with last night... so stay tuned because I may have another cool variation to show.
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
eds66bronco said:
here are some shots of my setup. stock 5.0 from a crown vic with the upper intake rotated 180. 1 inch plenum spacer to clear the fuel pressure regulator. this is also with a 2" body lift. no way would mine fit in the stock hole without angling it out towards the driver wheel well. here is a shot of the bracket i made from the original mounting plate.

What did you do to regain the angle of the pushrod from the pedal to the Hboost?
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Mad do you have any safty wires on the ends of the bolts ....in my world when I built something like this and about the time I've stopped thinking about it ...one of the nut will come off ...Looks like a good design but I'd drill the tips and put in a cotter pin ........
 
Top