• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

building new gas tank

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
i made up some plans a while ago. these were drawn in illustrator. i have not gotten around to building one yet but i did get the bottom form bent up in 1/4 plate to start with. i figure the rest will be 14 guage. not sure what to coat the inside with?? any suggestions? depending on what you are running (carb/FI) you can move or delete the vent/return line. hope these help
 

Attachments

  • Gastank1.pdf
    90.8 KB · Views: 130
  • GasTank2.pdf
    91.1 KB · Views: 103

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
PAPITT said:
eds66 What size tank is those drawning for 23 gal or the stock 10 gal ..
i think when i did the calculations it came out to about 22 gal. you can add more to the height if you are running a body lift to gain a few more gallons. the best bet would be to use these plans to mock one up from cardboard to make sure the tank fits the way you want. i took the measurements from my frame and tank to do the plans. i would double check the height and placement of the filler neck extension and sending unit hole to make sure they will line up with the setup you have. hope the plans were helpful.
 

ManTruck

Bronco Guru
Joined
Apr 17, 2003
Messages
1,271
Sorry guys I have been unavailable for the last week. I will send the Cad drawings or the pdf if needed. It is the same drawings posted by
eds66bronco.

Let me know if these are still needed.
 
Top