• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Pix of Astro H-boost w/EFI Please

Sbolt19

Bronco Guru
Joined
Nov 8, 2005
Messages
1,098
Loc.
Colorado Springs
I am looking for you guys who have the Astro H-boost mounted with out the angle bracket and that are also running 5.0 EFI. I spent the last couple of hours looking through a search and only found 1 pic from Lars w/something I am looking for. Any one have this set up? I am trying to do my homework before I take everything apart and get in trouble.;D So anyone who has a good picture of this, please post it up so I can get a good look, it would be greatly appreciated.
 

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
Check out my gallery photos. I've got a couple shots of mine in there. Mine is real tight but its a 351 W not a 302.
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
Not an EFI but it's a 351W with an Astro Hboost with a Vette MC..............
 

Attachments

  • DSC00054.JPG
    DSC00054.JPG
    149.3 KB · Views: 72

la77

Sr. Member
Joined
Aug 5, 2004
Messages
487
Loc.
Alexandria LA
Check Out My Gallery I Think I Have One In There. I Did Have To Angle The Bracket Away From The Upper. Added Some Washers To The Side Of The Intake Between The Bracket And Fire Wall. Then Added Some Black Silicone Between To Seal Everyting Off. If You Are Mounting It On A Really Clean Underhood Setup Just Move It Over About 1/2", Ream Out He Holes And Slide It Over If It Is Already Mounted Up. If Just Adding Hydroboost Drill Your Holes So That You Have The Needed Clearance.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
if you have an auto, you can move the whole thing over a few inches and come straight out of the firewall. just move the brake pedal assembly over to the left and it will clear the intake no problem. i made a plate for a friend's swap out of 1/4 plate that was drilled for the stock bolt holes in the firewall that hold the pedal assembly to the firewall. you'll find it comes out easily and makes the mods to the pedal easier. use the stock mounting plate as a template. depending on your shifter setup, you will need to watch the clearance for the linkage at the column. sorry, i never did get pics of this setup.

when i did mine, i modded the stock astro bracket to angle it away from the intake. the booster mounted in the stock mc location and the hoses were very close to the column linkage. i have an np435 so i bent them a bit to clear some space. see the pics and see if it makes sence. hope that helped
 

Attachments

  • hb1.jpg
    hb1.jpg
    85.8 KB · Views: 53
  • pushrodsm.jpg
    pushrodsm.jpg
    118.1 KB · Views: 56
  • hBoostsm.jpg
    hBoostsm.jpg
    155.8 KB · Views: 91
Top