• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

15x10's or 15x8's for 36" TSL RADIALS>> Pics Needed!!!

z70what

Bronco Guru
Joined
Oct 28, 2005
Messages
1,022
Loc.
Johnson City
I just picked up a set of TSL radial w/ 75% tread left on them for 200 bucks... they are 36x12.5x15 tsl radials... I'm not sure if i want to go w/ the 15x8's or 15x10's... I know when these wear out, i'm going w/ the Iroks (36x13.5), so i feel like i should get the 10" wide rims... What do you guys think??

I've also just ordered my stonecrusher steering as well. and will be setting it up TRO.. let me know

I'm also running JD extended radius arms which are bent to accommodate larger width tires/wheels... Let me know what you guys think... and post some pics of your 8's vs 10's..please.


Luke
 
Last edited:

jarrod

Sr. Member
Joined
Nov 6, 2005
Messages
377
Loc.
Cedar Hills, Utah
These are 15x10 dont know if this helps but i went with 10 because I too want to go wider after these
 

Attachments

  • 35tiresrims4mx.jpg
    35tiresrims4mx.jpg
    229.4 KB · Views: 52
  • cepektire8fw.jpg
    cepektire8fw.jpg
    224.2 KB · Views: 55

Kaw-Liga

Sr. Member
Joined
Aug 30, 2006
Messages
533
Loc.
Palm Coast, FL
I don't have any pictures, but I have 15x10 wheels and just mounted 36x12.50 TSL bias plies. Prior to those I ran 36x13.50 Iroks bias plies. I just paid for my stonecrusher setup yesterday so it should be here by mid-week. I can say that the TSLs look good(no ballooning) on the 10" wheels wheras the Iroks bulged a little bit. I ran the Iroks at the same psi as I'm running the TSLs, 20psi. I can tell you that the 12.50 TSLs handle noticably better on road(less wandering) than the Iroks did. And since my trip in the woods on Friday I can tell you that the TSLs put the Iroks to shame in the mud! It is like a world of difference in the traction between these two tires. Holes where I'd need momentum and quite a bit of wheel speed it seems like I can just about idle through them now with the TSLs. I almost can't wait till the TSLs wear out in a few years so that I can buy some 38.5x11 boggers! Sorry for rambling on, point is, in my opinion you oughta go with the 10" wheels. I'm not sure of my backspacing but I may need 1/4" spacers for the stonecrusher setup(not a big deal as I allready have a pair from my '73 Mach 1.

Rob
 

Salgood

Sr. Member
Joined
Jun 3, 2003
Messages
634
Loc.
Kalispell
Go with the 10 inch wide wheels. Here are pics of both.....BC
 

Attachments

  • Copy of DSC00981.JPG
    Copy of DSC00981.JPG
    59 KB · Views: 82
  • DSC00840.jpg
    DSC00840.jpg
    114.7 KB · Views: 50
  • DSC01358.JPG
    DSC01358.JPG
    59.8 KB · Views: 64
  • DSC01387.JPG
    DSC01387.JPG
    60.2 KB · Views: 73

kntr

Bronco Guru
Joined
Oct 7, 2006
Messages
2,277
Go with 10s. Ive run both 8s and 10s and 10s look and wear a lot better.... especially with 13.5s.
 
OP
OP
z70what

z70what

Bronco Guru
Joined
Oct 28, 2005
Messages
1,022
Loc.
Johnson City
i think i'm going to go w/ the 10's... however, the tsl radials tread width is only like 9"... wish someone on here had the same tires mounted on a 10" rim so i could see how they look.


Luke
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
here are the 36's on 15x8's i can run them at 10psi without loosing a bead. not sure how a 10' would hold at lower psi.
 

Attachments

  • BackView.jpg
    BackView.jpg
    156.3 KB · Views: 95
  • eds66.jpg
    eds66.jpg
    184 KB · Views: 131

cmud

Full Member
Joined
Dec 23, 2004
Messages
166
Loc.
Eastern Washington
I run 36 tsl radials on 10" rims, my contributor stus is up,but there should be pictures in the gallery. I like the 10" rim, run about 8 psi when wheeling, no problems...
 
OP
OP
z70what

z70what

Bronco Guru
Joined
Oct 28, 2005
Messages
1,022
Loc.
Johnson City
thanks cmud... how do you like them?? the ones i got are about 1/4 of the way worn out (75% tread left)... ride good? i really think i'm going to like them, as soon as i can find some 15x10 rims..


Luke
 

66ALRIDE

Just BIP It!
Joined
May 9, 2005
Messages
1,785
Loc.
Dothan, AL
Here is a set of 33x12.50 on 15x10's. They only measure 9" also though.
 

Attachments

  • Post7.JPG
    Post7.JPG
    133.3 KB · Views: 79
  • Post4.JPG
    Post4.JPG
    141.4 KB · Views: 93

cmud

Full Member
Joined
Dec 23, 2004
Messages
166
Loc.
Eastern Washington
:cool: I love them they ballance out and drive nice. The thing that's nice is the sidewalls flex better than bias ply tires, thus putting more rubber on the rock. But the sidewalls aren't veary tough. It sounds like you are getting a good deal, jump on it.:cool:
 
OP
OP
z70what

z70what

Bronco Guru
Joined
Oct 28, 2005
Messages
1,022
Loc.
Johnson City
another guy just contacted me today, he's got 5 american racing wheels black steel, one of which is brand new, and the other four have 4 trail rides on them... and he wants 100 bucks for all five...??? but they are 15x8's?? Not sure if i should just go ahead and get em'...?? what do you guys think?

Luke
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
z70, here are some other shots. i don't have any straight on shots other than the one i posted above but these 3/4 shots show them pretty good
 

Attachments

  • bronco 9-05 001.jpg
    bronco 9-05 001.jpg
    83.3 KB · Views: 61
  • bronco 9-05 004.jpg
    bronco 9-05 004.jpg
    73.1 KB · Views: 70

kyle

Bronco Guru
Joined
Nov 2, 2001
Messages
2,199
36x14.5 on a 15x10 wheel
 

Attachments

  • Barn 019-4.JPG
    Barn 019-4.JPG
    47.5 KB · Views: 80

texastreasures

Sr. Member
Joined
Feb 24, 2006
Messages
492
Got to be 10s

Here are MTR 35 12.50 with 15X10s
 

Attachments

  • tires and wheels 2.JPG
    tires and wheels 2.JPG
    179.3 KB · Views: 51
  • wheels and tires.JPG
    wheels and tires.JPG
    165.8 KB · Views: 65
  • wheels and tires 2.JPG
    wheels and tires 2.JPG
    157.1 KB · Views: 58
Top