Search results

Then I slid the drivers radius arm close to the frame hole and saw I was about an inch off. I placed a floor jack under the drivers radius arm close to the end and applied force until the end of the radius arm was equal with the mounting hole. At this point the axle on the drivers side was...

To Reinstall Radius arms on the axle: I installed 4 degree polyurethane bushings from Wild Horse as I had a 2.5 inch lift on the truck that I installed when I was 17 in the 1970s. Ensure you read the inside of the bushings and are clear on how they go in. The bushings need to be...

I recently replaced my C bushings in my 1977 Bronco but after tearing into the front suspension a whole bunch of other things got replaced. Below is what I did to replace everything. For what it’s worth. Purchased truck Jack stands at Harbor Freight for about 160 dollars. The jack stands...