Search results

Long story short, I broke my NP205 doing something stupid involving a glob of RPM in RW Hi, and a clutch dump. I confirmed it's not the transmission by driving the Bronco around my neighborhood in FW Hi. The Bronco bucks like I knocked some teeth off of the output shaft. I'm going to...

I have an idea for a hood, I'm just having a hard time stomaching $500+ to ship a $5-600 hood. So I'm thinking about buying a cowl hood for a fox body, cutting the cowl out and shaping it to fit my Bronco. If I buy a new fiberglass hood, I'm going to wind up cutting it up anyway since I want...

Are the silicone heater hoses worth the extra $? My heater hoses are 4 years old, they're just generic parts store rubber hoses (not molded) and I've noticed that they are getting kinks in them. I'm sure its because they're older now, but driving the bronco around in 19* weather has encouraged...

Looking for either a WH Higlander or Jeff's Mid Rise hood. Willing to drive to MD, NY, PA, DE to pick it up.

Ballistic fab is going out of business, everything on their site is 25% off https://ballisticfabrication.com/

After installing my long arms, I haven't used 4x4 much. After the last snow storm, I noticed what seems like the U Joints binding against the u joint housing (drive shaft side, not pinion yoke) during deceleration/ braking. I drove home the rest of the way in 2WD, but wanted to know if I can...

Figured is start a thread for these since they are popping up fairly often. Here's the one up today...

I read the mini starter thread Jon wrote back in 2013 and decided to give it a go... well it hasn't gone so well. I need some help, I've gone through 2 mini starters so far, one from a 1995 F250 5.8 and one from a 1994 Mustang Cobra (both manual). I love how fast they start but it seems like...

Show off your shift knobs. I've decided to shorten my JbFab twin sticks and figured this would be a good opportunity to put some different shift knobs on since I'm going to be cutting new threads.

Finally got around to pulling my ZF5 to replace the hydraulic slave/tob and scratched the surface of the pilot snout on my input shaft. It doesn't seem super deep but my nail catches it. Can I get away with sanding it smooth again and then installing a roller pilot bearing instead of a bronze...

Lost both of my dowel pins, not even sure how that happened but I'd like to buy another pair of them if you've got them. Thanks

Looking for recommendations for AUX reverse lights. I've had a 5" rectangular halogen reverse light on my bumper, mounted under the hitch for about 10 years and the bulb finally burnt out. Any recommendations for a similar light? I've got a prerunner rear bumper so the flush mount ones are kind...

I don't know if this has been posted before, but this is wild. https://vintagebroncos.co/modernized-classic/?utm_source=Organic&utm_medium=Instagram&utm_campaign=Bio&fbclid=PAZXh0bgNhZW0CMTEAAaYMxmBM6Wg14YwXM7yJXjU4E4_KKi5sBJw3TQL4lbDkjJTqIZQZR-_iYaM_aem_OqqgUF0Av2NvzU3lMAecDw

About a year ago I swapped in a new clutch with new slave (this is a zf with the slave and TOB combined). I'm getting a high pitch chirp and grinding sound in gear. The sound slows down and stops when the clutch is depressed. Since the TOB and pilot bearing are new, my guess is that the input...

Scored a Duffs prerunner bumper after searching for a few years and it came with some KC Daylighters. I'm pretty excited, but have also never wired in halogen off road lights before. What gauge wire should I use for them, going to put a relay and 30A Fuze in line and want to use a Bronco hazard...

One of my 20 year old LED turn signal bulbs finally gave up and I ordered new ones from Amazon. I figured I'd share since these are very bright and pretty cheap in comparison to other high end turn signal bulbs. These are 1157 LED bulbs with projector lenses on the end. Running lights are nice...

I had a leaky wheel cylinder so I replaced it and the brake hardware while I was in there since the shoes and drum were in good shape. I can't get the drum back on, barely any tension on the self adjuster. I'm wondering if the pins that go into the wheel cylinder are too long, since the shoes...

Bought this air cleaner, it's about 1/8" too big diameter wise to fit with my HEI distributor. I don't really want to go thru the hassle of sending it back to CJPP, $40 shipped Comes with base, lid, and filter. I used the stud.

My boys love riding in the Bronco but they're now at the age where they're too big for car seats, and have moved on to booster seats. The booster instructions say I can't run them with a lap belt only and wanted to get recommendations on either a 3pt harness or another solution I haven't thought...

I got some Bilstein 5100s and one of the boxes is missing the bolt sleeve that goes through the rubber bushing. Any ideas on where to get one of those? I threw the old shocks out last week otherwise I'd steal those. I found the Bilstein parts kit but its 20 bucks for the whole thing when I just...