Search results

So, I received my rear fuel sender, and it looked short. So, I matched it to a friends, and it seem wrong to me, but on the box, it says it fit's a 66 to 76, Here are some pictures of the new one to my friend's. The float arm and suction tube and filter seem short, or is this what they are now.

I 'm curious what type of hemi joint, have you guys used on track bar? I thinking of changing the end that bolts to the frame with a hemi joint and leaving the axle end urethane bushings. My track bar is 7/8 -14 threads and 9/16 bolt. I know hemi transmit vibration so I think if I leave the axle...

Does anyone know, what thread size and pitch of the adjustable end ? Is it 3/4 x 16 threads.

So has anyone heard ,if the 2022 calendars are done? or when they will be available.

I had to change my axle seal, so i'm going to replace the metal seal that goes between the backing plate and axle tube. I forgot which way the raised lip on the metal seal faces? Does the raised lip face the backing plate or does it face the axle tube?

Well, just put on my steering shock and used Duff brackets. These are nice brackets, they have a built in angle at the steering arm, which levels the shock and gets rid of the bind and step angle. I did have to move the bracket on the crossmember towards the passenger side, so the shock would...

I'm looking at the WH high angle driveline kit and wanted to know if anyone has used and installed one.(https://www.wildhorses4x4.com/product/High-Angle-Front-Drive-Shaft-Kit/Early_Bronco_Driveshafts) . With my new Trex arms and 3.5 inch lift that measures 4.5 inches, the angle is pretty steep...

Well finally got back from a month long road trip (7190 miles). And we stopped by James Duffy to give them a hard time for leaving sequim Washington 😁 great people, met James Duffy's wife, great lady, and got me some T-rex black arms, Christmas early for me😁

Just stop and visited James Duffy, great people !!! I ended up getting their T-rex arms in black for my 74, and was wondering what degree c -bushings you guys run 4 or 7 degree ?my 74 has 3.5 inch lift and I do have the James Duffy adjustable radius arm brackets that I can adjust 1, 2, or 4...

Just curios ,if anyone has used the NGK WR5/2438 V-POWER PREMIUM spark plugs for a 302. I like that ,their a little shorter , since I have headers. I've used the motorcraft plugs BSF42CA, but haven't been happy with them,, so I was thinking of trying the NGK PLUGS and how well this v-groove will...

Has anyone used this pulley from BC Bronco ? https://bcbroncos.com/shop/cooling/water-pumps/15-00432-2-groove-billet-aluminum-water-pump-pulley-for-early-bronco/ I want to make my radiator fan to move more air at idle and I've read if I use a smaller pulley on the water pump, it will move faster...

I installed the 3.5 inch rear leaves, 9 leave pack with a wedge from Tom's and and wanted to know if anyone had the same results. I know since I don't have doors or a top and no spare tier on back ,that will affect the lift height, But will it add 2 more inches to the 3.5 inch lift? measuring...

Hey Paul, my 74 looks like it needs a new axle on the passenger side, the seal surface is pretty worn. I pulled the axle and its 28 splined, the brake size are 11 inch and shoes are 1 .75 wide. the inner seal is a national 51098 and the bearing number is 88128-2RS. I 'M NOT SURE HOW TO MEASURE...

I'm installing Tom's 3.5 inch rear springs and not sure if I need the wedge under the leaves. The old lift was a add a leaf which gave me 3 inch lift and had no wedges, and pion was angle up. So I'm not sure if PO moved the spring perches. What degree was the stock pion angle? Here are pictures...

I'm curious, on my 74 rebuild 302, I don't run a heater, so I've just looped the heater hose from the water pump to the manifold. Can doing this cause my engine to run hotter? If so, should I take the hose off and put a plug in the intake and cape the water pump? It runs around 183 to 195, in 70...

Hey I'm getting ready to install my 3.5 inch lift in the rear, and wanted to ask what bushing lube do you guy's recommend? I bought everything new in the rear so if I have to cut bolts, just to make it easy as possible and we no how that goes with this old OEM stuff;D

Well, I got my wife's center counsel/cupholders from WH, mounted and put some fake wood on radio door and front , coin pocket holder. It's WH cheaper counsel, it needed a little modification to fit but wasn't to bad.

Looking for soft half doors for my door inserts. Only need the lower door, NOT THE UPPER WINDOW. 74 Bronco

I bought TOM'S 3.5 inch rear leaves with military wrap on one end. Has anyone installed these? I'm asking because it looks really tight where it attaches up front. I email Tom's and they said they will work. What's weird is the wrap is not round over the eye of the leave ,it's kind of oblong. IF...

Has anyone installed the WH center console with cup holders? It did not come with instructions. I assume picture 1 thru 4 is how the rear mount on the console and to the floor. In picture 5 and 6 I'm not sure how that bolt would work with the rear leg on rear? and pic 7 metal wavy bracket not...