Search results

New in box Gen 2 Quick 4 Controller for 4R70W. Has the newer style 9 pin solenoid connector and the Square/Rectangle Prindle switch connector. I ended up going a different route and won't need it.

Looking for an explorer serpentine front dress, I mostly just need the passenger side alternator bracket, but if you have an entire set up I would be more than happy to buy it all. Let me know what you have, thanks!

Finally, the time has come for me to install the Solo Motorsports radius arms I have had for a bit, as well as build a track bar and add ram assist, along with possibly some coilovers or fancy shocks to be determined. I have built a similar track bar set up on a buddies Bronco that came out...

2000 explorer harness and 4x4 4r70w transmission. I received these parts in a Bronco purchase that had the explorer engine installed but is carbed. I am currently enjoying the carb and don't plan on swapping to efi. This is the most complete harness part out I have seen. Everything from the...

Everything you need for an explorer swap minus the engine. Perfect for the person wanting the ignition and management system that comes from an explorer swap without the hassle of buying an explorer or slaving away in the junk yard. Everything you see in the pictures was already pulled and I...

Working on a Bronco right now that was a frame/body swap. Basically, a rolling chassis from a "running" Bronco swapped under a Body from a different "running" Bronco. The chassis had a carbed explorer motor in it, so it has all of the explorer front dress. Engine has a Duraspark dizzy in it...

Looking for a floor shifter for a c4, Lokar is back ordered till March. Trying to get this thing going before then. Let me know what you have. Thank you,

Hello Bronco fam, I am cleaning shop before moving next year and have a bunch of parts I have accumulated over the years. New in box 351w TFI distributor $45 Prothane Leaf spring bushing kit $40 A3M1 and A9L OBDI computers !!SOLD!! Both computers are in good working order, both have...

I have a complete 1972 302 with an original 3 speed. It was purchased as a package that came with a Bronco purchase. I received it in September and have never had it out of the crate. I was told by the previous owner that it was freshly rebuilt and only has a few 100 miles on it. The bronco...

After swapping in a 351w, 4r70w, and atlas 2 a few years ago using a mustang injection set up I have never been able to track down a random stalling issue I was having. Coupled with the tuner not making time to finalize the tuning, I decided it was time for an explorer injection swap. I...

Question for anyone running a "not stock" engine w/ EDIS swap running the explorer computer controlling the transmission. Say you have a 351w swap running explorer ignition and are using the stock transmission harness along with it. Is the transmission tunable at all? Will it shift like a...

Looking for an explorer harness and computer so I can do an EDIS swap. Trying to avoid purchasing the whole vehicle if I don't have to. If anyone has one that ended up going a different route, let me know.

Questions for the few on here that I know can help me out. Building a set of long radius arms. I know there can be some drivers side swing due to the trackbar but does that mean I center the axle at full bump or at ride height? While I am going up and down and around on the lift during the...

Running a 4r using the PCS Simple Shift controller and I can't seem to get the trans to hold first. If I shift the gear selector all the way into (1) and accelerate it will eventually shift into second. It seems to "hunt" between 1st and 2nd if I put it in (1) If I put it in (2) it seems to...

I am having some off the wall issues that I know some of your here can hopefully help me with. I will give some background first. I recently swapped in a 351 with a stock bottom end, flo-tek aluminum heads, small lunati cam, trick flow intakes, summit 70mm throttle body, lightning MAF with a...

I have a brand new never used 4r70w crossmember (SOLD) from Bronco Hut that didn't work for my application. Also I have a set of Bilstein rear shocks for stock shock mounts and 3.5" lift, I didn't run these very long, they are pretty new. $40 (SOLD) c4 transmission and dana 20 transfercase...

looking for a rear exit return style (2 Ports) fuel rail from an explorer, any help would be appreciated!

The time has come for full width high pinion 44 and 9 inch. The 44 is getting a grizzly locker, rcv's, 1350 yolk. 9 inch is getting a spool, load bolt third, 35 spline axles and 5.38 gears. This thread will mostly be used for suspension tech as I am trying to run 12" stroke triple bypasses in...

Hey everyone, Mr. Rags and I were planning on hitting Gordons Well or Glamis for thanksgiving this year as we have done in the past and wanted to extend the invite out to see if anyone wanted to join. All of our local friends have opted out so I was curious to see if I could drum up a few more...

At the NWBR my C4 lost 1st gear (My Fault) instead of using money to fix it I am contemplating swapping in the 4R I have in the shed. I am trying to get back up to 100% working order quickly without pulling a $5K trans swap. I am trying to make sure I do the best combo gear set up through the...