Search results

Does anyone make tube/trail doors for fiberglass roadster inserts?

Free aluminium radiator. Cleaning up garage and found this on a shelf. From what I remember, it has a repairable pinhole leak. Intake and outlet are in stock location. Looks to be in good shape, held water when I just tested it, but it was not under pressure. I believe its a 3 core, will...

So I am having an issue with the gauge cluster illumination and need some advise. The black lights on my gauge is super dim, basically non existent. No change when twisting the light knob. I don't think it's a grounding issue because the green turn indicators and blue high beam indicator...

Went to replace my cam and noticed water in the oil. So, removed the heads and found water in the top of 4 pistons (3 on passenger side, 1 on drivers side). What are your thoughts? Old gaskets don’t look too bad

So, I was replacing my intake the other day (more like a month ago). 2 bolts broke off in the process, luckily 1 was easy to remove. I was able to drill second one out, but as I was re-tapping the hole, the freaking tap snapped off, in a bad way. There was no material above the surface, in fact...

So I botched up my steering shaft and column a year ago, and welded parts together temporarily. But now I'm ready to set it up right. I definitely need a new upper and lower shaft, but also will need the column shaft clamp and any bearings (if there are any, mine are gone). So I saw that TBP...

Hey I am looking for a pair of the plate that fits over the shim, they have a sunken head hole on it. It is not these: http://www.tomsbroncoparts.com/product/pair-liftgate-latch-striker-trim-plate-66-77-ford-bronco I can't anyone that makes/sells them thanks

I got a pair of these: http://www.tomsbroncoparts.com/product/pair-liftgate-latch-striker-trim-plate-66-77-ford-bronco but the holes are huge. What sort of bolt/washer are you guys using? Thanks

Looking for a set of sun visors with the rods. I'd prefer black, but will take any color in decent shape. Thanks for looking.

I have a Stant 10491 locking gas cap. I bought it by accident online. It will fit it early style neck. I needed the later style one. It is brand new, still in the box. Will ship on your dime

I recently replaced my stock steering wheel with a smaller grant steering wheel. My question now is how does the black metal "c" shaped cam cancel part go back in place? Part of my problem is the PO had removed it for some reason, so I didn't see how it was installed to begin with. LMC has a...

Had this idea about adding a power inverter where my aux tank gas cap used to be. Original post on is the NorCal Broncos site, check it out: http://www.norcalbroncos.com/forum/showthread.php?p=147699#post147699

So I've been chasing a fuel delivery issue for months. About 6 months ago I swapped in a 23 gal tank and switched from a carb to tbi. And for the life of me, I could not get the system tuned. She would idle fine, in fact sounded great at idle, but as soon as I'd start driving, she'd bog down...

This may sound silly, but I have searched around with no luck. Can you run Fiberglass Door Inserts with a Hardtop?

Does anyone run them? I was looking around to a new distributor, and these look like that latest and greatest. All you need is an external coil and you're good to go. Just wanted to get your opinions. Btw, right now I run a Ford Duraspark.

Anybody use this TBI setup? I know it's old technology, but I hear once it's tuned correctly, it works well. Anyways, I was hoping someone here uses one and could give me some tuning help.

So I have a 351w, runs great, but found a problem. I recently removed my stock tranny/transfer case to replace with NP435/D20. I had noticed a pretty bad oil leak at the same time. When I dropped the oil pan I noticed a strong smell of gas in the oil, the oil also seemed very thin. Any...

So, does anyone know the size of the tiny e clip that holds the distributor vaccum advance to the distributor on a 351w? I was replacing the vaccum advance module when the little e clip flew to who-knows-where.

Did I just blow up my engine?? Here's the scenario: For the last day or two, I have noticed a small fuel leak. The gas was dripping in between the back of the engine and the bellhousing. All the lines were secure and couldn't find a leak. Tonight when I started her up, she ran real rough...

Not mine, but its near by. Much cheaper than others listed in the same area. Not many pics but the seller will txt you more if requested. Although it is listed in the San Luis Obispo are it is actually in Fresno http://slo.craigslist.org/cto/3667228797.html