Search results

i've got (3) roll cages. (2) are full front with the back leg extensions. one of these is gully assembled and welded the other one is not yet welded and needs to be assembled (front and back legs/parts/etc) (1) is just a half cage that goes over the seat and up to the dash. all three need a...

gang- looking for a rolling frame with a clear title. basically have everything else, just need the frame and wheels to drop it on.... thanks! cd

team getting the rig painted and i've searched high and low for for the original colors/codes but need a little help........ so far i've got the following: base color blue - Acapulco Blue Poly PPG-13357 grill color grey- Argent Silver PPG-8568 (is this correct?) this is what i need: hardtop...

team- been off the boards for a long while; still have my bronco. long story short: have a 1970 sport with a salvage title. was driving one day over 10 years ago when the engine caught on fire. insurance title paid out but declared it salvage. bought it back from them for $500 only things...

did a search on body and paint shops in san diego and saw there were a few in lakeside and escondido....good stuff.... was wondering if anyone had any additional suggestions. getting 2 quarters put in and the whole rig painted. thanks cd

i havent posted in a long time but i did a quick search and didnt see these posted. I've come across a couple of early bronco sightings in some older flicks lately: "Con Air" when the cons take off from laramer airstrip or whatever after a big shoot out a truck or something runs into a faded...

im painting the rig and need to replace the passenger air intake vent (the one that goes to the heater). the problem is i need to remove the fender to replace it then if i replace it the part under the intake vent doesnt get painted. anyone else run across this problem? what order do i do...

im painting the rig and need to replace the passenger air intake vent. the problem is i need to remove the fender to replace it then if i replace it the part under the intake vent doesnt get painted. anyone else run across this problem? what order do i do this...paint then remove the...

i havent found any good original quarter panels. im looking to go uncut, so my options are to weld in someone elses old cut-outs or to go aftermarket and replace the whole thing. any suggestions? thanks cd

ive asked before, but maybe stuff has changed in the last 6 mos. whos used them and where did you get em? or would you never use them if your life depended on it? thanks cd

i need to put the passenger side intake vent for the heater in the cowl/fire wall, which i can do, but im wondering if its sealed some way or got seam sealant around it. mine was melted and scorched so i have not frame of reference. anyone got any ideas behind this? i was thining of dropiing...

Anyone tried these quarter panel replacements? (lower quarters) Are they the same as the ones you can get from JBG? i heard that they all come from the same place, but dont know for sure. thanks cd

so i stripped her down and were gonna paint. my question is what does one do when you want to paint the entire truck, engine compartment and all, as well as the exterior, but in order to install the passenger side air intake you must remov the fender and the grill. - do you paint then try and...

i am replcaing my roll cage with a new one and the holes at the floor/bed from the old one do not line up with the holes in the base plate of the new one. any ideas how to deal with this while still maintaining the integrity of the floor/bed of the truck. it looks like i can weld a 6" sq 18-22...

i curious who makes the best replacement quarter panels. im looking at both sides being replaced. any ideas? please relate your experiences, positive and negative. thanks cd

so i flipped the old glove box and got the dash welded back together form the back side. i was wondering how to treat the front (cab) side that will be visible. should i fill the small 1/16" seams with bondo? or shloud i weld the front side and try and carefully grind down then use a little...

ill be towing my bronco behind my freinds cherokee to the body shop. ive disengaged the rear diff from the drive shaft so they will spin free while the front 2 will rest on the tow bar that he has for towing cars. as a side note, the steering shaft has been removed. the box still remains with...

just got an "NOS" quarter panel i am not sure is really NOS. how can i tell if it is? looking at the top flange that appears on the original (on the bronco) it is nothing like the one i recieved UPS. the original quarterpanel top flange on my bronco now seems to look like an upside down...

i am replacing the crappy old power steering box, did all the frame upgrades, etc, and now i need to bolt it on. what side does the nuts go on? the box/outside of the frame side or the inside of the frame? does it even matter? thanks cd

im looking to powder coat my door panels, dash, and roll bar. the dash has a moved glove box and some bondo in it. is this gonna be ok or am i gonna have to go regular paint? ty cd