Search results

if any of you guys get out to Moab, or come to Grand Junction to go play, Rangely is a place you should check out. Awesome wheeling up there, some real hardcore stuff, and stuff for everyone else. http://www.rangely.com/rock-crawling.htm (and they were nice enough to stick my bronco on their...

Just thought I would share this. If you are looking to add steel to the rig, this can help see how much the stuff really weighs :D http://www.chapelsteel.com/weight-steel-plate.html

So, I know we all go camping in our rigs, or at least love things EB, and we figured this might go over well. If we get enough interest, we will make a run and do a group buy. Early Bronco fire ring: 6 sided Each side will consist of two options: 18" long, 11" tall, or 23" wide,11" tall, and...

Can someone run out to their Bronco and get me a quick measurement? I need to know, from the front edge of the stock coil bucket, how far it is to the center of the first top bolt hole on the stock powersteering box, and to the bolt below it. I forgot to measure on the other EB I have at the...

We regret to inform everyone that the official Moab Bronco Safari event will not happen this year. Registrations are down this year, and at this point we do not have the personal cash to front for the event like we have done in years past. In order for us to purchase shirts, pay insurance, BLM...

FRONT AXLE: Currie HP44(waggy width) with ARB and 4.88's, Superior axles with CTM's, Chevy flat top knuckles with 5/8 studs and OTT high steer arms, reamed for 1 ton Chevy/Dodge style TRE's, Chevy brakes & spindles with the big 44 8 lug hubs and Warn premium hubs, Dynatrac diff cover Steering...

DOH. wrong forum, cant delete it.

So I bought an RJM harness through Toms a few months ago to replace my stock harness, which was a mess. I was very impressed with how clean the harness was when I got it. Install was very simple, but there was a wire backwards on the main harness tie in. I fixed that when the harness was...

I have been running a 1" fan spacer and while getting crazy the fan got into the radiator. I need to move the fan back a bit. Anyone got a part # for a 1/2 fan spacer?

A friend took a few high res pics of a recent run, think any of these are good enough? I submitted to Jon, but wanted to get some opinions... 1 2 3 4 5

I need to know what to use to go from the intake to the Mass Air sensor housing. I would like it to be something I can pick up at a parts store, only need to be a short length and straight. I have seen pics on here, but cant remember where or what was used, but it seems like it was blue. Thanks

So while in Rangely CO at the new rock park on Sunday, I ate my BC Broncos radiator. The core support seemed pretty snug but after me getting my Iroks warmed up climbing a big nasty rock, spinning my way up at about 2500 rpms, the bronco caught and bounced and I made it and WHAM, radiator was...

Since I personally know of 4-5 folks who have been looking into other options for axle shafts, and I will be looking for options for my D60 this winter, I contacted Joe Attardo, who runs Endless Mountain Fab back east. He has found that options seem to be limited as far as D44 shafts right now...

I need to replace the bushings/etc in the column, lower part especially. Are these something that Napa would carry and does anyone have part #s?

When I was running the stock EFI setup, the center post on the back of the ignition went to a thick gray wire on the EFI harness. Now that its gone, where does that center ignition post go to? Im kind of behind the 8ball to get it finished, so any quick help would be appreciated. Thanks

I got tired of dealing with and looking at the mess that was my EFI harness, so I bought a new RJM harness from Toms. I sure do like dealing with Toms by the way. I am so stinkin happy with this harness. Very cool and well put together. Once I started the EFI cleanup, I ended up tearing into...

So im putting in my new RJM harness and the pass side O2 sensor hooks up, but there aint much slack, the driver side is about 3" short. Are there O2 sensors with different length/longer pigtails so I can get around this? Im just running the WH shorty headers.... Thanks

Finally got around to ditching the nasty rear bumper Ive been running for a while. I wanted something that followed the lines of the front bumper setup I built. Front: The rear is not as *pointy* on the ends since I had alot more width to deal with. I think its coming along good thus far. I...

Not sure if theres been one of these on here, or at least recently :) Got the idea on another board im on.....So, post up your before and after pics and tell the story if there is one! When I got the bronco, it had been rolled on I-70 and was a mess. I paid 300 bucks for it as the body was...

Posting for a friend of mine...email him NOT ME. 59.5" wms-wms 5x5.5 or 5x5 bolt pattern Big bearing 31 spline 4.56 gears factory lincoln discs WITH e-brakes and cables Low pinion rear axle Asking $450 or best OFFER!!!! For $100 extra I have the parts to convert a 6 lug small bearing D44...