Search results

Can anyone give me the wiring use and color for the Wild horse Wiper motors? I'm in the middle of rewiring my rig with the Centech harness and forgot which wires are for park, low speed, high speed, etc... Any help would be great. TIA

Those seats are identical to mine, minus the headrests. Good choice if I say so myself!!!!

If you need a motor seabiscuit, just shoot me a PM. I have a 302 bored 30, Crank that has been turned .10 under, Cam, Heads, Intake, and some other odds and ends. I would be willing to part with it for a very good price. Since I now have a FI motor that is complete. Plus the freight to your...

I would spend my cash(if I had any) on a EB that was original and had low miles. Nice truck, but for $30k. Not something I would buy.

I have not heard anyone doing it but I do have a one question, why? I know you have the parts, but I mean even if you did swap all of the D60 stuff into it now the weak point is going to be the Ring and Pinion. I would find a 9" center section and build that. The 9" center section has a...

X 2. Seems like the springs lose the strength and holding power once you do this, but it can work for a short time. If it was me I would just get different springs. I would do an add-a-leaf before blocks.

Vapor Lock maybe???? Do you still have the mechnical fuel pump on your truck???? There have been quite a few people who have had trouble with them in the past.

I was up at Mike's place just last week. The rig is sitting in his garage right now as we speak. Nice truck and it has a lot of great items on it. The Propane is about the coolest thing on that truck. Mike told me it will run on its side. Don't ask me how he found out, but it does.

I love the way you have your truck setup!!!! Where did you end up finding your front axle???? One of these days I'm going full width, I'm jealous!!!!

No. I would go with a Holley Blue or a Mallory adjustable pressure pump. I would go with a nice item instead of a cheap item. Just because this is a nice motor and you want to protect your investment.

That all depends on where you mount the F-250 shock mounts at. The height will vary depending on each application. So I would install them and then measure, and talk to whatever place you intend to buy your shocks.

I will preach the Dana 20, again. I would run it just because of the weight difference from the 205. But you could do a doubler which would be cool, and dam near unbreakable, plus the 4:1 crawl. So you have to figure with the first gear getting multiplication of anywhere of 1.5-2.5 times what...

DEAR LORD!!!! CARNAGE!!!!! I just like the fact that it is a pretty common transfer case, it is stock in our trucks, can be built really good, and it doesn't weigh as much as my whole truck!!!! Hell if I had the money right now I would buy the STaK three speed unit, and have TRANSFER CASE...

I'm pretty sure that Bullet Proof steering has their's custom made for there steering systems. Antony's, I'm not sure where he gets his, but they are a nice item. When you buy the Stonecrusher steering you get all the ones you need for the system. You also get two extras!!!

So what did you find???? Hopefully money!!!! J/K. It sounds like you just have a twin stick. There should be to seperate shifting rail devices. Looks like a twisted pieice of flat steel, and it should hook to the shifting rails.

I have got rear Yukon's from Mike at CORE. I busted my front stock axles within the first hour of just messing around my land. I will be running Yukon's and the Super U-Joints, and that is the same setup as Mike. He actually busted his CTM's and now has moved to all Yukon stuff. So far from...

Yeah there is a thread going on here under bowhunters name for the rear bumper. Gives all the details of what is going on with the rear bumper. Also Bow, aren't those MIG welds instead of TIG? Not trying to steel(<---pun intended) your thunder. Looks real good!!!

BMCQUEEN, your truck kicks major ass!!!! Have like it since you got it done. Anyone ever think of painting there rig Sonic Blue??? Same color came on the 03 Cobras, but it is pretty pricey!!!!

Can't help you there, but I can contest to the strength of the Dana 20. My buddy was always giving me shit about how I swear by this transfer case. I've got the Tera Low Gears, Built Rear Output housing, and have mine fully rebuilt last year. To say the least it is stout, and Mike(owner of...

Yeah I have them in my truck. I really like them. I have NP435 and then 3.15 gears and then 4.56 axle gears. My crawl ratio is about 100:1. Gives great control over terrain.