• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. M

    Can I paint my radiator?

    Paint helps protect the copper/brass from corrosion, radiator suppliers and shops always paint radiators for this reason
  2. M

    Welding question..

    There should be a chart on the wire door that gives you an idea of the correct setting for your welder for different metal thicknesses and wire
  3. M

    Welding question..

    What size wire, metal thickness and amperage are you running? If you have the heat to high and the speed to slow the wire will burn before it can be fed into the steel
  4. M

    Welding up holes in the body?

    I weld up my trim holes by building up small spot welds starting at on edge of the hole and then going over it with a weld to strengthen it after the hole is completely filled. The heat will shrink the metal in a little, you can heat it and shink it back out, or bump it out with a hammer. Can...
  5. M

    Fuel injected 302 with harness

    I have a 302 out of am 86 bronco, the motor ran good when I pulled it and was very strong, however it had a freeze plug out of it so I do not know if it caused any problems. The motor is complete including all accesories, and fuel injection, and ignition system still atached. It includes the...
Top