Search results

im gonna need to dig into this, my rear is not locking, never has. never had time to look. this year though.

Shoot thermo housing with an IR gun, whats it say?

Sounds like air but not squealing. So, try jacking front end up as high as you can, engine off, then slowly turn wheel lock to lock and watch res, any bubbles? Leave it at lock overnight try again next day. My problem needing hundreds of cycles turned out being one of those inline PS filters...

groan is normal, no squeel means bled, you might just have it too full.

Is there a squealing noise like it's not bled? Wheels lock to lock 90 plus time with wheels jacked up off the ground, a lot? PS filter? Cooler?

yeah, ace hardware your friend for shimming

thats nice. so is the rear view using mirror or a camera? Both? OMG, is that a.......

get a flat edge yardstick, try all the pulleys for plumb and square

yeah, oblong weld spots, thats one worn out factory welder

I vote no.

I have to admit to not really caring about lift as long as it does not exceed valve clearance with pistons,

Unless you are going to use it lightly or as a shop truck, I'd consider the pitting as severe, as in more than 50% of frame strength is gone. Not even sure what those inboard triangle pieces at front of frame are used for, radiator? Depending what you want to do, a new $4,000 frame might save...

like base and lobe circle, he gave that number to you? And while it may measure to what he says it should measure, it might be a wrong design. I mean at your stage you know what you are doing, and the hardest part should be ensuring roller position on valve stem.

I know you can build to get .6 of lift, whats the max that engine/head/piston can take? Whats the tolerance allowable? And put some more clutter on that table it's to clean.

I have a woody cam, did not see this issue, you need to call him and ask whats up.

didnt see mention of fuel filter? Using a pressure gage, does pressure never rise, or does it rise slowly. You have both a mechanical and electric pump? Has it ever worked? How old is gas?

I would not cut that cross channel, looks to me like you need new body mounts.

leave a few inches extra wire...

Problem nvrstuk is, I can buy every part for my jeep as oem, fix to new. EB, not so much

maybe a picture? Which means you have to be a contributor sorry, but I can't imagine what the issue is without a photo