Search results

Thanx for the help and direction. It helped a lot. I got back into it and I removed the signal switch. I immediately noticed a break in the insulation of the wire for the right rear turn signal. I did not have to pull the wiring system out and I could see it. Apparently, I had caught the wire...

The right brake light does not work. I will pull the signal switch wire for the right rear signal and check for a short there first.

I just replaced an old aftermarket steering wheel with a new Grant steering wheel. When I removed the old steering wheel I discovered a broken signal switch and no canceling cam (the turn signals had never worked). It appeared that brittle plastic and aftermarket roll pins used to replace the...

Got it. Thanx!

Also, I have a ‘75 Ranger; 302; 3 speed automatic-C4; 2.5 inch lift; 32” BFG’s; long tube headers and an attitude

Couldn’t wait. Turned on headlights and gave the relays a whack or two. Low beams came on. Unfortunately, when I turned the headlight switch off and then on again, the low beams would not come back on. Gave the relays another whack, or two and they came on. Repeated several times with the same...

Thanx guys. I have the weekend to work on it. I’ll let you know how it goes.

I could use some help on my H4 headlight conversion kit I bought from Tom’s Bronco Parts. I installed the upgraded wiring harness, which connects to the old harness and installed the head lights about 3-months ago. The system worked great until about month ago and the lights would only work on...