Search results

My 77 had the oem stock suspension bought 2" - 2 /12" front coils to level it out now the rear is low (maybe the old stock coils were really sagging)thinking of putting blocks in the back. When I measure from the top of axle to frame on front it is 9" rear is 7" so i need 2" blocks for the...

If this didnt sell for some reason I'll take it 256-214-2867

Front of truck sits lower than rear.No lift. I replaced my c bushings and the trac bar mount has cut the side of my c bushing I think my springs are tired. I have talked to several vendors and they only offer variable rate springs is this what i want or do i need to find constant rate? The meas...

I bought my first eb in Oct. 2010 had the same issues you r having. Had my steering box rebuilt helped some but the one thing that made a big difference was the trac bar bushings it tightened every thing about 90%. There is a thread on this forum that is excellent for c bushing and radius arm...

If you decide to part it I want the ac condensor and the center air vent please.

That would be a ROLL bar.

Would you happen to have a rool bar for sale? I'm just east of you in Decatur can pick up.

looking for a four point roll bar

What type of roll bar and how much?

The door sticker is missing but the riveted tag in the glove box says the axle code is J18 and the GVWR is 4600. Thanks for the info you gave me.

I have a 77 EB and am wondering about some of the codes in my vin#. It says it is a U151 and in the Bronco Graveyard catalogue this specifies a heavy duty model are these common or rare and what makes it heavy duty?

I ve had my first eb about 6 weeks now its a 77 all stock I've put good rubber all around and covered my seats and am really enjoying this beast of a truck. BUT the steering wheel has play in it. So I took the shaft off the box to check the splines and the box splines are good and the ones in...

I just bought my first EB the 10th of October its a 77 all stock. I'm replacing all the fluids and want to know mainly what to use in my transfer case. Also what weight oil for the front and rear diff. would yall recomend. I live in north Alabama