Search results

heater box Helloooooo Nurse!!!!!!!!!!!! in my bronco Ebay: hotwheels-77 Bronco:1977 Joined: Jul 03 Posts: 1078 Heater Intake box? Can u put the heater fresh air intake bo in the bronco w/o taking the passenger fender off? I just painted and would prefer not to take the fender off if I did...

I just voted in and out with three different machines and do not see an update in count. What rate does the site update at??

BroncoEddie, another possible is the dimmer switch connections. Anything that is subjected to wet boots that can carry salt in can eat the connector terminals or the wire in the terminals. Also had the wireing brake several strands at the terminal and it will be very resistive to currents that...

Outstanding looking track. Good looking rigs. Dusty where in the world did your front bumper come from?? Your build?

Beautiful Bronco Bear!! That is the best Jade green/Gold combo I have seen and the top really compliments the combo. Have an interior pic?? Ruel

That would sound good. I would like to let VHB option on them. Let me know via Towman27@classicbronco.com if he doesn't want them. You can also get me at Towman27@hotmail.com Thanks, Ruel

That really looks nice with some real design thought behind it compared with the cut and strap mod we used to do to the original seats back 25 to 30 yrs. ago. Ruel

The last time I checked the used were going for $30 a pair from a truck yard, the aftermarket closest equivelent was $40 a pair and the Ford dealer part was $120 a pair. Ruel

cjj I would be interested in the swing-aways if VBH is not. How much? Is the passenger side convex? Are they the bright finish? Thks, Ruel

Bronco Driver issue #4 had the best article coverage I have ever seen of the models made over the years of the EB. They are pretty scarce. There was one glue together made that was a after market resin type (about $60) and no more that I have seen. I have been following it since my first full...

Success!!!! Got in and out clean with the win 2k machines.

Get the same ERROR 404 with a refresh Jon Ruel

What is even more peculiar is I can access top4x4sites from the LINUX on a direct address browse but not on the Win machines???

This is peculiar, I just got through on my LINUX machine but the Win 2000 pair don't work, get error 404 message

I have tried from my three networked machines and get an error message each time. That is for three days now. Wots happenen?? Ruel

Hey there, it doesn't directly tie to the ing. sw. it goes to a juction as wire #904 and ties at splice S-203. From that splice which is in the bundle 3 or4 inches from the switch again W-904 goes to the back of the ing. sw. at the "run" terminal and a Red/Green wire "Ys" off the same terminal...

Howdy, if you want to use someone local you could try Eric's Bronco Corral in Englewood. (303)806-8933. They are good people. 3935 S. Lipan St. Ruel

andy, I checked the harness on my 73 and the Green/red wire comes out of the wiring harness about an 1.5 in. from the firewall grommet on the passengers side along with the yellow and orange leads which all three hook to the regulator. The grn/bl wire is the middle wire in the hook-up between...

andy the green/red is the ing. sw. run position wire for controlling most of the operations in the run mode. It goes to the regulator through several terminations and connectors to control the relay in the regulator that keeps the battery from discharging through the alternator. It also is the...

There is only a rudimentary radio hookup origianlly present in the harness. Wire number 137 is the radio power and is colored Yellow with a black stripe. It is switched by the Ing. Sw. thru F-12, 7.5A fuse. The female bullet connector is usually in the harness about the back of the lighter...