- Joined
- Nov 11, 2007
- Messages
- 8,223
SOLD. Thank you.
Selling 1966 U13 Bronco Roadster uncut, no rust, driveable project.
Price dropped to $2900 minus seats, grill and bumper, grill will be replaced with better shape 69 grill.
One of a known 150 or so survivor "Roadster" models, one of a select few that actually move under their own power.
Purchased from PO on this thread to see build and answer most of your questions regarding details:
http://classicbroncos.com/forums/showthread.php?t=193378
Currently has the 200ci out of a Fairmont, lots of power. Comes with original 170.
PO did a great job on replacing all the bad metal with good. 66 eybrow grill in good shape. Hood was toast and was replaced.
I took it to next level and completed motor tune and throttle issue, rebuilt carb, fuel system, green hood in pic below replaced red hood on bronco pic. All the lights work, gages work.
The bad, bench seat from falcon or something like that, it works. Heater still disconnected, not to worry, it's summer in Phoenix. Clutch needs replacing but is drivable. Front end will need bushings and such to improve drive ability. Brakes need to be adjusted but work. Front bumper/frame still cut but have the frame ends to weld for repair, body shop est $200 to make it look like they never came off.
This Bronco is ready for a little time as needed while driving it around to bring it back to full glory.
I have decided to reduce my inventory so it is for sale.
Selling 1966 U13 Bronco Roadster uncut, no rust, driveable project.
Price dropped to $2900 minus seats, grill and bumper, grill will be replaced with better shape 69 grill.
One of a known 150 or so survivor "Roadster" models, one of a select few that actually move under their own power.
Purchased from PO on this thread to see build and answer most of your questions regarding details:
http://classicbroncos.com/forums/showthread.php?t=193378
Currently has the 200ci out of a Fairmont, lots of power. Comes with original 170.
PO did a great job on replacing all the bad metal with good. 66 eybrow grill in good shape. Hood was toast and was replaced.
I took it to next level and completed motor tune and throttle issue, rebuilt carb, fuel system, green hood in pic below replaced red hood on bronco pic. All the lights work, gages work.
The bad, bench seat from falcon or something like that, it works. Heater still disconnected, not to worry, it's summer in Phoenix. Clutch needs replacing but is drivable. Front end will need bushings and such to improve drive ability. Brakes need to be adjusted but work. Front bumper/frame still cut but have the frame ends to weld for repair, body shop est $200 to make it look like they never came off.
This Bronco is ready for a little time as needed while driving it around to bring it back to full glory.
I have decided to reduce my inventory so it is for sale.
Attachments
Last edited:
