• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on. - Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SOLD 1968 Bronco

Status
Not open for further replies.

Keestone

New Member
Joined
Oct 13, 2011
Messages
2
1968 Bronco: Mildy built 302 with less than 500 miles on extensive, documented rebuild. Mild cam, GT40P heads, headers, roller rockers, Edlebrock 650 cfm 4 bl electric choke carb, mid rise aluminum intake, upgraded alternator. Runs perfect and has tons of torque. C4 automatic, originally 3 speed column shift manual, still has clutch pedal. C4 shifts smoothly but does leak where the transmission mates to the transfer case. Dana 20 J-shift transfer case. Ford 9" rear end, Dana 30 front end. Shortened driveshafts. Fresh paint on body and hard top. Has a power steering conversion from Wild Horses with a 3:1 ratio and new pump and adjustable steering shaft. Also has a power brake conversion kit from Tom's with the angled bracket kit. Rebuilt drum brakes on all four corners. 35x12.50 Goodyear Wrangler MT/R's with Kevlar that have less than 300 miles on them. Also have full size spare on new rim (Mastercraft M/T with 75% tread). Comes with brand new Hi Lift 48" jack. Tom's 6 point roll bar, new leather sport seats, leather Lecarra steering wheel, new full carpet set, complete Racket Jacket insulation kit for floor, wheel wells, and hard top. Locking center console and Tuffy security drawer underneath passenger seat. I have the original back seat too. New driver and passenger floor pans, new inner and outer passenger side rocker panel. New door jambs on both sides. Wheel wells and underside of body have been coated with Duplicolor Bed Liner with Kevlar. All new weather stripping and gaskets. New tie rods ends, drag link, ball joints, also have dropped pitman arm, dropped tracking bar bracket, new body mounts but have not yet put them on. 90% finished, just don't have time to finish it. I have lots of pictures, including many before I started making repairs, should have some up soon.
 
Status
Not open for further replies.
Top