Swerve
Sr. Member
- Joined
- Jul 31, 2014
- Messages
- 526
I have a BARE block with main caps / main bolts for sale. 351 Windsor. It is supposed to be a 1969 we can confirm numbers / date before any deal is made. It has been tanked and cleaned and magnafluxed. Checked OK for cracks, I have the receipt from the machine shop. The only issue is one cylinder has pitting from water when sitting before I got it. It may clean up .030 over but it may be better to go a little more over bore or just plan on sleeving that one cylinder. If you plan on .060 over then you should be all set without a sleeve. $200.00 obo, possible trades.
I also have a pair of BARE 351 modified heads that have had the machine work done to them to be used on a Windsor block to make a fake Boss 302 or Clevor 351. 2v open chamber. The two water passages on each head have been machined to accept a core / freeze plug. They also have been drilled and tapped for screw in studs. They have been tanked and cleaned and magnafluxed. Checked OK for cracks, I have the receipt from the machine shop. They will need valve guides and valve seats along with the usual valves, springs etc... that go with your cam choice... $100.00 for pair obo, possible trades.
I am specifically looking for; Good used or new... Wild Horses wrap trap. Decent sport grille trim. Tail light bezels.
I accept paypal sent as if to family and friends, USPS (you go to post office) M/O and cash...
I do not know how to handle shipping these since they are sooo heavy. I can strap onto a pallet for pick up if necessary, and I can assist with loading but I do not have a fork truck, just a pallet jack. I do have an engine hoist though. I may be able to deliver in Maine, New Hampshire, Vermont and North East Mass (Stoughton area up 95 / 93 to NH) as long as I am paid in full up front. I can also help with a relay starting within that territory.
Thanks, Swerve
I also have a pair of BARE 351 modified heads that have had the machine work done to them to be used on a Windsor block to make a fake Boss 302 or Clevor 351. 2v open chamber. The two water passages on each head have been machined to accept a core / freeze plug. They also have been drilled and tapped for screw in studs. They have been tanked and cleaned and magnafluxed. Checked OK for cracks, I have the receipt from the machine shop. They will need valve guides and valve seats along with the usual valves, springs etc... that go with your cam choice... $100.00 for pair obo, possible trades.
I am specifically looking for; Good used or new... Wild Horses wrap trap. Decent sport grille trim. Tail light bezels.
I accept paypal sent as if to family and friends, USPS (you go to post office) M/O and cash...
I do not know how to handle shipping these since they are sooo heavy. I can strap onto a pallet for pick up if necessary, and I can assist with loading but I do not have a fork truck, just a pallet jack. I do have an engine hoist though. I may be able to deliver in Maine, New Hampshire, Vermont and North East Mass (Stoughton area up 95 / 93 to NH) as long as I am paid in full up front. I can also help with a relay starting within that territory.
Thanks, Swerve
Attachments
-
Ford 351 Windsor Block Modified Heads 004.jpg -
Ford 351 Windsor Block Modified Heads 005.jpg -
Ford 351 Windsor Block Modified Heads 003.jpg -
Ford 351 Windsor Block Modified Heads 001.jpg -
Ford 351 Windsor Block Modified Heads 002.jpg -
Ford 351 Windsor Block Modified Heads 006.jpg -
Ford 351 Windsor Block Modified Heads 007.jpg
Last edited:
