• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

203/205 doubler clocking questions

Silverhorse

Bronco Guru
Joined
Aug 25, 2006
Messages
1,029
Loc.
Pensacola
I'm about to get the doubler adapter and I'm trying to figure out if I should clock or not? Some people I have talked to did and other have not. Just trying to get some ideas and opinions. THANKS I know I could get Jeds and weld myself once Ive figured the positioning and I may do that but If I go with ORD I need to know now.;D
 

Madgyver

Contributor
Bronco Madman
Joined
Jul 30, 2001
Messages
14,904
Clocking it yourself you have the option of making it work with your front driveline....

I got great service from Jed's. They were able to respline my output shaft and send me correct input/output shafts to work with what I had...
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
I didnt clock mine as they both ended up sitting basically the same as my zf. The 203 and 205 in stock as I had heard really do sit at the same level.
Hopefully I can get mine in tomorrow to start making crossmembers for it, I'll post up some pics. I had mine done for stock position since I really wasnt going to gain anything by clocking them but with Jed's he gives you 2 other options for mounting on the 205 in 8* increments I believe. I also recommend Jed's, good service, communication and excellent product, mine went together real easily, cant wait to get it in!!!!!!!!!!!
 
Top