351c/m/400 rear sump oil pan

[ugly74]

I thought an oil pan would be easy to find at a junkyard. nope!

please tell me that one of you guys has a spare laying around!
Thanks,
Dan

 

[bax]

Not that oil pan. It is completely out of production. You can find one if you look around the swap meets. Tim Meyer is now making new ones. They are nice and will work fine.
Good luck

 

[ugly74]

I just looked at those (Thanks!) and they aren't even that expensive.
pan& pickup $225. not junkyard cheap, but better than the $400 someodd on milodons site. (my wifes patience with this project is growing short)
I'll give this here ad time to pan out before I go buyin 'em.

 

[Bronco73]

Hit one of the full size bronco sites and Ibet you find one. That's how I found the one I needed when I was looking for one.

 

[bludorbronc]

i cut the cleveland pan in half and stock 302 bronco pan in half and welded them together and notched around cleveland oil pump and made one pan. did same for oil pickup. price was right but took a little time , been running it for about 30 years still holding.

 

[Superjunk]

I have one.$50 plus shipping.Let me know if you are interested and I can get some pics for ya.

Thanks,John

 

[ugly74]

Thank you guys for the ideas and offers.
I found another yard that had not one, but two oil pans. I grabbed one for $20.

it's the "U-pull auto parts" in Fountain, CO. (south academy exit)
lotsa good stuff in there

 

[feitctaj]

WOwW car-part.com has so many you can't swing a dead cat without hitting several