3spd floor shifter (need a picture)

[clarrance]

Does anyone have a picture of where to cut the tunnel for the Duff 3spd floor shifter?

 

[clarrance]

Nobody has a picture? I'm helping a friend in the morning install a Duff floor shifter and he is nervous about cutting a hole in the tunnel. A good picture or some measurements would be helpful.

Thanks

 

[Scoop]

Chad, I looked for a pic but didn't have one. I just laid the cover in place, traced around it, and cut about an inch inside the line. You only need to cut on the side of the tunnel. If he's nervous, just cut a small hole and enlarge as needed when you install to clear the shifter and rods.

 

[thegreatjustino]

Here are the installation instructions with cutout measurements.

 

[clarrance]

Here are the installation instructions with cutout measurements.

WOW, ask and I shall receive. That is perfect thanks