3spd to auto help

[GMSALTY]

I know this has been discussed but here I go . I have a original 3 on the tree column and transmission , I now have a donor 74 with auto column and c4 complete...are there any parts or wiring that I should get before making the switch. Don't want to get half into it and then have to order stuff (which I know will happen no matter how prepared I think I am)

 

[garberz]

Auto style carb, for kick down lever.
Auto type starter.
Trans cooler and plumbing.
Remove pilot bushing from crank.
Wire up neutral safety switch.
Replace double lip seal in transfer case adapter. http://www.wildhorses4x4.com/product/dana20_Adapter_Housing_Double_Lip_Seal
That's a start, I'm sure others will add to it.

 

[blubuckaroo]

Is your C4 from a Bronco? If not you'll need the adapter and stub shaft.
Auto dowel plate w/inspection cover
flex plate

 

[DonH]

I do not know about your radiator but my 68 EB did not have a built in oil cooler and finding a place for oil cooler was not easy. I solved this by getting a new radiator. I did not have a donner 74.
The brake pedal assy from the donner 74. I solved that problem by cutting the clutch pedal off in place saved hours of work.

 

[GMSALTY]

Yes my c4 is from a bronco ...the 74 I bought was just chassis with motor, trans, all linkages and complete column...other stuff too ...power steering!!!