5.0 High Output Ford Engine Efi -$400- Craigslist

[Blackcypress-EB]

Not mine, just passing along. Might be a good swap setup.
http://dallas.craigslist.org/pts/272346301.html

 

[Brettman]

Will that motor swap "easily" with our brand of EBs?

Brettman

 

[Blackcypress-EB]

As long as it is complete, your hardest part is wiring in the harness and rigging an electric fuel pump system. You would need to tap your exhaust for an O2 sensor. The '91 cougars are Mass air flow.(good) Everything else is pretty much small block ford. The timing is different from your engine, but you don't have to worry about that on a full engine swap.

 

[Brettman]

I have all the harnesses needed along with the computer. I am going with an AOD.

Is this a fair price considering the engine is in good shape?

Brettman

 

[Blackcypress-EB]

My advice would be to talk to the guy and see what the story is on the motor. If it sounds like it was not hurt before pulling, it would be worth the price to me for the things listed. You can sell your extra ECM and make a couple bucks back. Provided all the intake stuff out to the MAF sensor is there and the accessory brackets. I was trying to find a full H.O. car to pull from for a while, but this would be less headache. Except for having a visual guide to wire by.

 

[Bronco Brian]

I think it is only PARTS?? not a comlete motor

#1
bronco60-niner
Full Member


leavenworth,ks
Joined: Jul 05
Posts: 159 EFI Conversion parts
Location: leavenworth
Price: $400
Email: demon357@yahoo.com


--------------------------------------------------------------------------------



I have a complete efi system (less fuel lines from tank and pump)from a 91 Mustang GT. This includes the complete engine harness with injector harness and o2 harness, A9L computer, map sensor, mass air meter, upper and lower intake with sensors, fuel rail, regulator, injectors, throttle body and egr spacer, coolant rail, distributor and coil. $400 + shipping.

email me for pictures or questions. demon357@yahoo.com