MS 66 U13 Roadster SOLD PLEASE REMOVE

[4-Wheelin']

Don't get too excited. This is a parts vehicle only and has been picked apart well for my completed 66 Roadster. Perfect frame - tub is cut in the wheel wells but the rest of it is pretty solid and straight. It will need some pan work. Stock original 6 cylinder engine with 3 speed on the tree. Motor - trans - transfer case all work. It has drive shafts. No axles or suspension parts at all - It's sitting on blocks. Has the driver side mirror on the fender. Windshield frame complete with glass and motors. Dash has speaker grille cover. Bronco sport fender badges. Bad hood and front fenders. Front grille average.

Everything else I kept for my other project if it isn't mentioned above.

It's currently covered in 10 inches of snow. Pics will have to be later in the week.

$900.00 takes it.

 

[half cab]

;D

Don't get too excited. This is a parts vehicle only and has been picked apart well for my completed 66 Roadster. Perfect frame - tub is cut in the wheel wells but the rest of it is pretty solid and straight. It will need some pan work. Stock original 6 cylinder engine with 3 speed on the tree. Motor - trans - transfer case all work. It has drive shafts. No axles or suspension parts at all - It's sitting on blocks. Has the driver side mirror on the fender. Windshield frame complete with glass and motors. Dash has speaker grille cover. Bronco sport fender badges. Bad hood and front fenders. Front grille average.

Everything else I kept for my other project if it isn't mentioned above.

It's currently covered in 10 inches of snow. Pics will have to be later in the week.

$900.00 takes it.

Looks like snow will be around for some time.Temp not getting to high for the next several days in N. Ms.

 

[4-Wheelin']

Freezing cold outside for sure. Hope the "Wife" doesn't get to cold shooting a few pics - lol!

 

[4-Wheelin']

I am interested in trading all of my Bronco parts for a Jeep CJ project if anyone LOCAL is interested. Any place within a couple of hundred miles. I'll throw in all of the parts in my 66 U14 ad as well. Other Jeeps considered. I can deliver and pick up. Detailed photos of everything I have and photos of what you want to trade.

It doesn't have to be a cream puff. I'm looking for another Jeep for my next build.

 

[dead road]

Sounds to me like a cool project for someone who wants a highly modified u13. Stock looking body and interior and colors on 37's or something. That would draw a crowd.

 

[4-Wheelin']

Sounds to me like a cool project for someone who wants a highly modified u13. Stock looking body and interior and colors on 37's or something. That would draw a crowd.

It only came with a bill of sale. Last titled owner is long gone. Lots of good parts though. I would have restored it in a heart beat. I couldn't have finished my first roadster without it. I'll post some pics Saturday. Nice tub - it's cut of course but other than some front pan work it's rock solid. Nice solid mounts - rear floor and wheel wells. Frame is rock solid.