• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

'68 window tracks

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
On my '71 doors there are two elongated holes in the back of the door above and below the latch. But on this '68 door I acquired, there is only one lower elongated hole down low. Up high, there are bolts for the bolt-on window frame. How does the track bracket attach on a '68?

Is this a PO modded track? Hard to believe it would be factory.
 

Attachments

  • window track 1.jpg
    window track 1.jpg
    67.6 KB · Views: 75
  • window track 2.jpg
    window track 2.jpg
    100.4 KB · Views: 75
OP
OP
Baja71

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
It uses the lowest window frame bolt then? So the track bracket is sandwiched between the window frame and door, or does it sit inside the track so the window frame is sandwiched?
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Door, lower track, window frame.

If the window frame was the second one, you'd have a heck of a time slipping it back in behind the track without taking the door apart.
 
Top