rjlougee
Bronco Guru
- Joined
- Dec 26, 2001
- Messages
- 1,959
It's come time to sell my '70 EB, I need to fund some other projects. Here's what it has:
Very nice '70 body, there was some rust through in the drivers floor, but it has a panel placed over it. The rest of the body is in very good condition, I replaced the underhood areas that were rusted through.
Has 1991 Mustang 5.0 with brand new Ford Racing EFI harness, A9P EEC, etc...
NP435 tranny with adapter to the stock D20 transfer case.
23 gallon rear tank.
Power steering, Power brakes.
Front axle is a D44 with Ford disk brakes on it, brand new ball joints, 4.10 gears.
Rear axle is a stock EB 9", 4.10 gears.
Brand new 33" old style Goodyear MT/R tires, still have sticker residue on them.
Pre-runner style bumpers, rear has a tire carrier.
Fiberglass door panels with speaker pods.
Tuffy center console with stereo.
I just replaced the heater core in it.
Caged in the front, common 6 point, non-family type roll cage. If you don't like it, I can build another one.
The bad:
I rattle canned the exterior, so not really a nice paint job.
Windshield is cracked.
Still needs a couple little things like side marker lights, etc...
Hard top liftgate glass is not installed.
Pics can be seen here (just updated with current pics):
http://s1233.beta.photobucket.com/user/RJLougee/library/The Red EB
PM me or give me a call at 719-660-8093.
Joe
Very nice '70 body, there was some rust through in the drivers floor, but it has a panel placed over it. The rest of the body is in very good condition, I replaced the underhood areas that were rusted through.
Has 1991 Mustang 5.0 with brand new Ford Racing EFI harness, A9P EEC, etc...
NP435 tranny with adapter to the stock D20 transfer case.
23 gallon rear tank.
Power steering, Power brakes.
Front axle is a D44 with Ford disk brakes on it, brand new ball joints, 4.10 gears.
Rear axle is a stock EB 9", 4.10 gears.
Brand new 33" old style Goodyear MT/R tires, still have sticker residue on them.
Pre-runner style bumpers, rear has a tire carrier.
Fiberglass door panels with speaker pods.
Tuffy center console with stereo.
I just replaced the heater core in it.
Caged in the front, common 6 point, non-family type roll cage. If you don't like it, I can build another one.
The bad:
I rattle canned the exterior, so not really a nice paint job.
Windshield is cracked.
Still needs a couple little things like side marker lights, etc...
Hard top liftgate glass is not installed.
Pics can be seen here (just updated with current pics):
http://s1233.beta.photobucket.com/user/RJLougee/library/The Red EB
PM me or give me a call at 719-660-8093.
Joe
Last edited: