• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

9 inch axle shaft length

76 explorer

Bronco Guru
Joined
Oct 21, 2002
Messages
1,140
Loc.
oklahoma city
im working on a 79 bronco but i assume the 3rd members are the same so im hoping you guys can answer this for me. which side of a stock low pinion 9 inch does the long shaft slide into? ive had this truck tore apart long enough i dont remember.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
The 79 3rd memeber requires 31 spline axles the EB axles are only 28 spline. So hopefully you bought 31 spline axles for your Eb or the 79 third memeber wont work.

I guess I didnt read it good enough I see you are not swapping it into a EB.
 
Last edited:

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
broncnaz said:
The 79 3rd memeber requires 31 spline axles the EB axles are only 28 spline. So hopefully you bought 31 spline axles for your Eb or the 79 third memeber wont work.

You can swap out the side gears with the 28 spline variety if need be...no biggie.
 
Top