99 Explorer 5.0 brackets - forgot where they go

[skrit]

I'm rebuilding a 99 Explorer 5.0 and forgot where these brackets go - can anyone send me a pic or diagram please?

 

[Yeller]

I can help with one LOL the circled one goes to the top rear bolt on the AC compressor to hold some wiring.

 

[skrit]

I can help with one LOL the circled one goes to the top rear bolt on the AC compressor to hold some wiring.

View attachment 927607

Thanks! 3 down - I think the bottom most one and right most one mount on the upper intake plenum from what I saw on an ebay post.

4 more to go!

 

[904Bronco]

The center L shaped bracket bolts to the Drvrs side of the auto trans and holds the large square grey plug.

The one below it bolts to the tab with the hole in it on the passenger side of the auto trans, the trans harness clips into it.

Sorry no pic's as my trans is at the builders....

 

[skrit]

The center L shaped bracket bolts to the Drvrs side of the auto trans and holds the large square grey plug.

The one below it bolts to the tab with the hole in it on the passenger side of the auto trans, the trans harness clips into it.

Sorry no pic's as my trans is at the builders....

Thank you sir!

 

[gnsteam]

Here are a few pictures of my 4r70w. Showing the trans harness, and shift linkage brackets, shown in your post. And one not so good picture of a shield/bracket on the passenger side of trans.

 

[skrit]

Here are a few pictures of my 4r70w. Showing the trans harness, and shift linkage brackets, shown in your post. And one not so good picture of a shield/bracket on the passenger side of trans.

pictures are worth 1,000 words. Thank you. Clean looking tranny you have there!