lil' hotz jr.
Sr. Member
yesterday mike and i attacked my engine head leak, wish fingers crossed this will fix my weird coolant problems. when we got to down to unbolting the heads, the last one on the back of the engine was barely hand tight!!! no idea how this would come loose, but got it out, cleaned everything up, and started putting her back together. started putting the head bolts all back in, and mike, with the torque wrench, started tightening everything down. the bolt that was loose earlier would not get tight. took it out, and it had broken off down inside the head. found a pick, and was able to spin it right now, whoo hoo!
mike happen to have a spare head bolt, so we are now back on track. everything else went back together smoothly. got her started, and she hasn't over heated, and im getting heat inside. so she lives again. now...back to my drive shaft problem, hehe. when it aint one thing, its another. but atleast i can drive her again...except at the moment, it went from being the parent's lawn ornimate or mike's hehe.
btw, mike sterling, i cant thank you enough for taking time out of you schedule to teach and help me out with all this....and digging into your bronco stash, hehe;D
mike happen to have a spare head bolt, so we are now back on track. everything else went back together smoothly. got her started, and she hasn't over heated, and im getting heat inside. so she lives again. now...back to my drive shaft problem, hehe. when it aint one thing, its another. but atleast i can drive her again...except at the moment, it went from being the parent's lawn ornimate or mike's hehe.
btw, mike sterling, i cant thank you enough for taking time out of you schedule to teach and help me out with all this....and digging into your bronco stash, hehe;D