Another Hydroboost ??? Thread

[Bubbason]

#1 Name this master cylinder
http://eastsidecustomtruck.com/i-60897-hydro-boost-kit-ford-bronco-1966-77-without-body-lift.html


#2 Without hauling the hydroboost to the fastener house, 94 Astro, what size nuts go on the 4 mounting studs?

#3 Are there lock washers etc. on studs? (mounting to modified angle bracket)

 

[Rox Crusher]

corvette..........disc / disc

950 insane for something that can be done for 250 tops

 

[Dave]

10 mm X 1.5

Self locking nut with integral washer. Nylock and a washer would work fine.

http://classicbroncos.com/forums/showpost.php?p=1352198&postcount=111

 

[TOFIC]

corvette..........disc / disc

950 insane for something that can be done for 250 tops

definitely all disc master, corvette, camaro maybe? I will agree
950?! WWAAYY out of line. I agree, parts may go 150 maybe 200 labour is your own cost.
I routinely help guys do installs and most are under a hundred.

The guy is a HOSER dont touch it.
TOFIC

 

[Bubbason]

I'm at less than $950.00 including new sagi pump, brackets hoses and rebuilt box. Just need a engine side MC and that's the only kit I've seen w/ one.

 

[bigmuddy]

Why do you have to have MC with the ports on the engine side? I am running astroboost, disc/drum and master cylinder from a monte carlo I beleive. Takes a bit of bending but it works fine.

Ben

 

[Bubbason]

Inspired by Nicks.. looks so much better and easier
http://www.classicbroncos.com/forums/attachment.php?attachmentid=137714&d=1245980996
http://www.classicbroncos.com/forums/attachment.php?attachmentid=137818&d=1246142125

 

[TOFIC]

Just need a engine side MC and that's the only kit I've seen w/ one.

73 to76 Mercury Marquis Wagon with disc brakes engine side and cheap.
TOFIC