ATT. Everyone with spray in liners. Please look.

[RKM]

Now that I got your att. I was reading through some threads a while back about spray in liners, and DIY liners. I want to do one myself someday. My question to you is. IF I spray my textured liner on the top of the bed rails. Will my top still seal and keep out rain etc. I know I read somewhere on here that some of you were having problems with this. Please let me know if the problem exists, and what you may have done to prevent it. ie. foam tape on the undersides of the hard top/soft top rails.

Thanks guys.

 

[Broncoman]

My line-x bedliner is sprayed up and over on to the bedrails. I seals just a good as it did before. I don't really see how it could screw things up if you use a new seal if it is not spray too thick on top.

 

[JKrieg70]

I just did mine with Durabak a couple months ago and coated the bed rails. I didnt have any trouble with the top sealing. I also used all new seals for the hard top when I put it back on after putting on the liner. The only thing is the professionally done stuff is alot thicker than the DIY, if you had problems i think it would be with Rhino or linex because of the added thickness.

 

[RKM]

I personally haven't done mine yet. I am just looking out for a fellow EB'er. MnkyBiz. He is planning to do this to his rig. I know I read somewhere on here that apparently someone was having problems. Well it's good to hear that it is apparently not a big issue, and others are doing fine with it. Let's see some more opinions. The more the better. 2 OK's is great so far... ;D

 

[HotWheels]

I have line-x on mine also. New seals on hardtop. I foresee no issues.

 

[hd03sporty]

I had mine Rhino'd and it seals fine with the Can-Back top...