• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Back to the poor mans EFI

75junebug

Full Member
Joined
Jan 10, 2008
Messages
587
Loc.
NW Houston Tx
I developed some issues with my EFI over the roundup weekend, and could not resolve them, even after I got home. I poured money, time and parts into it to no avail. Yesterday, it all came out. All 27 miles of harness, fuel lines and sensors. Went back with my Q-jet and Procomp HEI dizzy. Also ran a 6psi regulator on the return line this time.
To make this tech..... For those of you with the Hei dizzy, you know its difficult to find the plug and pigtail that supplies the 12 volt and tach wire.
ACCEL has it, and I found it finally at Oriellys.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,218
NAPA has all those connectors as well.

Even better, I have found the OEM ignition parts at Ford and GM dealers to be far superior to anything sold at chain stores and worthy of lasting 10's of thousands of miles.
 
OP
OP
75junebug

75junebug

Full Member
Joined
Jan 10, 2008
Messages
587
Loc.
NW Houston Tx
Down here in the crotch of Texas, where I live, NAPA, and Carquest couldnt find it. Its the old adage.... If its not in the computer, it must not exist!
 
Top