- Joined
- Mar 28, 2012
- Messages
- 3,546
I purchased the BC Bronco 2:1 exhaust system with the BC headers and installed them on a 347 with and NV3550. Since this is basically a one size fits all transmissions set-up I wasn't expecting a custom fit, just something to get me to the muffler shop. For those who are interested here's some pictures of the install and finished set-up. I used a Walker quietflow SS muffler.
PS fits over the cross-member for the transmission. The DS hangs low and the bend is right at the cross-member. This design was probably so it could fit Automatics, but due to the NV 3550 cross-member being low, the cross-over pipe has to hang down low. The PS pipe was about 2 inches too long and had to be cut.
PS fits over the cross-member for the transmission. The DS hangs low and the bend is right at the cross-member. This design was probably so it could fit Automatics, but due to the NV 3550 cross-member being low, the cross-over pipe has to hang down low. The PS pipe was about 2 inches too long and had to be cut.