GA Beautiful '67 full stock restoration

[Mac2Night]

City: Atlanta
Price: $ Auction

---

Hey folks,
I wanted to draw attention to my buddy's fully restored 1967 on Bringatrailer.com this week (auction ends Sunday at 4:15pm EST). It is meticulous, a body-off restoration and the only things not put back as stock were upgrades (disc brakes, power steering, 4 speed, radio, wiring harness, and a few odds and ends). Ever mechanical piece is new or professionally rebuilt. Every nut and bolt replaced. I mean everything. Drive it ANYWHERE, it handles road trips to around town to the Smoky Mountain cruises.

If you or someone you know is looking for a beautiful, highly detailed, 100% quality truck, please take a look. Comments on BaT or bids are appreciated and welcome. This was a 5 year labor of love build and no expense was spared.

https://bringatrailer.com/listing/1967-ford-bronco-67/

 

[Mac2Night]

The following list below documents many of the new parts and work that went in to building this Bronco.

*Vintage car restoration shop auto body and sheetmetal work as needed;
*High quality base/clear paint on rotisserie (factory colors: Rangoon Red and Wimbledon White);
*Frame dipped/stripped and restored;
*Power steering box conversion;
*Power steering Saginaw pump and lines;
*New steering column;
*Electric wiper conversion;
*Wiper system cover;
*Sun visors;
*Heater box/core and fan assembly;
*Fresh air intakes;
*Dash controls/knobs/bezels/switches;
*New wiring (Centech);
*New gas tank/lines/sending unit/cap/fill hoses/stainless line brackets;
* All hoses and clamps;
*Original 289 V8 (Ewing Automotive power build);
*New exhaust manifolds;
*New exhaust pipes and muffler;
*Billet Pulleys;
*4 spd transmission (rebuilt);
*Clutch;
*Pressure plate and bearing;
*Cowl insulation pad;
*4 spd shifter;
*Rebuilt Dana 20 transfer case (gears, seals, bearings);
*High amp battery;
*Battery tray and hold down kit;
*Heavy duty battery cables;
*Radiator;
*Fan shroud;
*Overflow bottle assembly;
*Washer bottle;
*Washer pump, nozzles and lines;
*Gauge cluster (complete rebuild);
*Solid state IVR gauge regulator;
*1970s cassette stereo (New Old Stock);
*Dash speaker;
*Door straps;
*Headlight switch;
*Wiper switch;
*Upholstery;
*Seat foam and reconditioned frames;
*Steering wheel;
*Horn button;
*Headliner;
*Halogen headlights;
*Carpet kit;
*Chrome bumpers;
*Vent windows;
*Driveshafts;
*Shocks;
*Coil springs;
*Leaf springs;
*Tailgate rods;
*Tailgate handle assembly
*Tailgate latches and rods;
*Light lenses;
*Emblems;
*Mirrors;
*Hood struts;
*Gaskets and rubber (all);
*All new glass throughout;
*Windshield/hood hold down;
*Wiper arms and blades (stainless);
*Rear brakes (everything);
*Front disc brake conversion;
*Brake hoses;
*Brake lines;
*Master cylinder;
*Tires (BFG A/T 235-75-15);
*Hubcaps;
*Painted rims;
*Seatbelts (front and rear);
*Carburetor;
*Door strikers and hinges;
*Ignition (coil, distributor, switch, etc);
*Hardware (nuts, bolts, brackets, screws);
*License plate assembly (stainless);
*Tailgate handle assembly;
*Decals;
*Water pump;
*Alternator;
*Solenoid;
*Starter;
*Belts;
*Door handles (inner and outer);
*Arm rests;
*Door panels (stainless);
*Lift gate hardware;
*Glovebox insert and hardware;
*Dash pad;
*Warn premium hubs;
*Countless hours of restoration shop work and assembly to build this truck

 

[thegreatjustino]

'66 dash knobs in a '67?

 

[sprdv1]

Nice ride Mac..

 

[Mac2Night]

SOLD on BaT