FL Brand New Product - Twin Stick Shifter Cover Plate

[LSUpete]

Here is a brand new product that I'm trying to introduce to the Classic Bronco market.

If you're unsatisfied with the current products available for your transfer case shifter cover plate, then you'll love these items. This cover plate is fabricated from 3/8" thick bright anodized billet aluminum with the shift indications engraved in the surface. They are available in either black anodized or clear anodized....and they will add a very nice touch to any type of rig. The two shown below are fabricated for twin stick configurations, but I can also provide models for regular J-shift or T-shift transfer case shift patterns.

I currently only have FIVE of the black anodized and FIVE of the clear anodized.....both with the twin stick shift patterns. So, I'm going to open up sales to the first NINE customers only. If you're interested, please send me a "private message" and I'll coordinate your request.

The cost of the cover plate will only be $70.00 and that includes shipping to anywhere in the lower 48 states.

 

[thegreatjustino]

Cool idea. The problem I have had with the twin stick boot I've had for years is that it's too small to cover the larger hole I had to make with a 3" body lift. The holes in these look stock, which will not work with a 2" or 3" body lift. Any plans to address that issue.

 

[LSUpete]

Cool idea. The problem I have had with the twin stick boot I've had for years is that it's too small to cover the larger hole I had to make with a 3" body lift. The holes in these look stock, which will not work with a 2" or 3" body lift. Any plans to address that issue.

The cut-out is 3" wide by 5.25" long. That is much larger than the stock hole.

The overall size is pretty big too.......it's 7.5" wide by 10" long.

 

[MyOriginal66]

Looks great!!!

Is there any plans to make a boot that will fit/attach to the plate, since the hole is much larger than stock?

 

[LSUpete]

Looks great!!!

Is there any plans to make a boot that will fit/attach to the plate, since the hole is much larger than stock?

That type of boot is already available at all the Bronco Vendors like Tom's, WH and Graveyard. The boot is good, but the cover plate that comes with it is too thin and looks cheap.

 

[LSUpete]

A LOT of you have asked to see some additional photos, including some images of these plates installed. I'll get that done this afternoon and post them here tomorrow.

 

[fastcarkenny]

These are nice Pete. Any chanve they could be made to say "Front" and "rear" over the position indicators?

 

[LSUpete]

These are nice Pete. Any chanve they could be made to say "Front" and "rear" over the position indicators?

YES.....I have some set up with the words "FRONT & "REAR" below the gear indications. I'll post some photos tonight.

 

[LSUpete]

Okay, here are some photos of the cover plate installed.

This one is the black anodized with ONLY the shift indications.

 

[LSUpete]

This one is the CLEAR anodized with ONLY the shift indications.

 

[LSUpete]

This one is the black anodized with the shift indications AND the words "FRONT" & "REAR" below the gear indications.

 

[LSUpete]

This one is the CLEAR anodized with the shift indications AND the words "FRONT" & "REAR" below the gear indications.

 

[fungus]

Those are damn nice!

 

[ChrisC74]

Very nice work

 

[NateMob]

This one is the black anodized with the shift indications AND the words "FRONT" & "REAR" below the gear indications.

Ill take one of these, do you accept Paypal?

Thanks.

Ooops, just saw you said to PM.

 

[Passauf]

shifter boot

How does the JB fab boot attach to the bottom of the plate ? thx

 

[LSUpete]

How does the JB fab boot attach to the bottom of the plate ? thx

The boot doesn't attach to the plate. The boot attaches to the floor of the truck. The plate covers the boot and also attaches to the floor.

 

[TTTGOWYO]

This will be great for my project. Just have to get everything done and take some measurements. Great job on these.

 

[KyleQ]

I'll have to look into this for my Atlas - I've banged gears so many times the indicators have worn off already!

Wait - I know what each stick does, and nobody else drives it... lol, no need to give anyone directions!

 

[Passauf]

cover

Please contact me off line at passauf@san.rr.com with your paypal info....and yes I would like the front and rear option thx