• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco hut Headers

RB70bronco

Full Member
Joined
Feb 12, 2002
Messages
209
Loc.
Port Huron, Michigan
We’ll I recently installed duff long arms and just figured out they come in contact with my headers. I currently run a set of l&l ultra flows that Jeff’s bronco graveyard used to sell. I’ve been looking at the bronco hut headers and possibly their 2 in 1 out exhaust. Just wondering if anyone running these could give me some feedback thanks


Sent from my iPhone using Tapatalk
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,917
Duff has a single exhaust now too. You may need to call in for it though. May not be on the web site yet.
 

Tiko433

Contributor
I know just enough to be dangerous
Joined
Jul 9, 2014
Messages
1,856
Loc.
South West Florida
I’m running Bronco Hut shorties their 2-1 and Duff Long arms . The only issue I had was the driver side cross over pipe right under the trans it would not clear the bell housing, My friend BFH took take of it . Not too much just enough to clear. But no issues with interference between exhaust routing and arms. I love the sound too. I can take a road trip with out getting a headache any more Just to day I replaced one of their band clamps ... they could be a little wider .
 

Mikesimp70

Full Member
Joined
Jun 20, 2017
Messages
341
Wow, I've been contemplating 2 in 1 exhaust and came across the Bronco Hut setup just last night and was wondering if
anyone had any experience with them.

https://broncohut.com/search?q=exhaust

I have their ceramic headers and 2 into 1 exhaust. The system is well designed. I didn't care much for the 14" stainless muffler however. Way too loud. Replaced it with a 24" and sounds much better for me. (and the wife, and my neighbors, any car I pass on the left side.)
 

JeffG

Contributor
Sr. Member
Joined
May 7, 2004
Messages
511
Loc.
San Antonio, TX
I have their ceramic headers and 2 into 1 exhaust. The system is well designed. I didn't care much for the 14" stainless muffler however. Way too loud. Replaced it with a 24" and sounds much better for me. (and the wife, and my neighbors, any car I pass on the left side.)

Can you share the brand and/or part # of the 24" muffler you went with? My exhaust is way too loud.
 

Mikesimp70

Full Member
Joined
Jun 20, 2017
Messages
341
Can you share the brand and/or part # of the 24" muffler you went with? My exhaust is way too loud.

It is a StreetMax. SM12289. It is a perf tube straight through packed muffler just like Magnaflow so you get the same deep sound but much quieter.
 

Mikesimp70

Full Member
Joined
Jun 20, 2017
Messages
341

RT9

Jr. Member
Joined
May 29, 2014
Messages
72
Thanks.
I have the BH 2 to 1 system so they are combined before the muffler. I was contemplating going back 1 in to 2 out muffler to split the sound but my installer didnt think that would be a good spend. The 24” did the trick.

Sent from my SM-N920P using Tapatalk
 
Top