I bought a second Bronco that was a bit less of a project than my Bronco #1 with the intent of selling off #1. I moved a lot of the mods I have done to #1 over to #2, and for this discussion, swapping a WH 2 1/2" lift from the new purchase to the old one, and moving an older WH 3 1/2" from #1 to the new purchase. I moved both coils and leafs over, side for side. Now for the twist...neither one leaned before, but now the new purchase with the transplanted 3 1/2" lift has the strong lean. Bonus question, I am going to put new 7 deg. C bushings in to go with the added lift, but now do I follow the common procedure of pulling the control arms and tightening the C bushing retainer bolts until the rear of the arms are even on the floor? Because if I do, the truck wasn't level when I take them off, so wouldn't that them possibly make the issue worse? I have tried jumping on the high side, but it seems to be in its happy place.
Thoughts on why it changed from one to another, and yet the old bronc with the new 2 1/2" lift is level?
Thanks as always.
Thoughts on why it changed from one to another, and yet the old bronc with the new 2 1/2" lift is level?
Thanks as always.