PA Bronco Project - Sell Off

[j-hoyt1]

**SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD****SOLD***

******Bronco Parts - Lift Kit, Fiberglass Body, Rebuild 302 - Two of almost everything - please make me an offer on the whole lot. I will take offers on some of these items seperately, but I prefer cash and local pick-up.******

All right fellas, it is time for me to bite the bullet and sell off my bronco project. I am selling everything that I have collected over the years for my bronco. I think you will find that there is most everything needed to put together one mean machine. The list is as follows:

See Pics

or copy & past URL

http://s1007.photobucket.com/albums/af196/jameshoyt/

Chassis (titled[PA] as a 1972)- Sold
Frame was repaired in the very back - see pics- Sold
Lift Kit (dual shock)- Sold
Steering Stabalizer- Sold
31x10.5 BF Goodrich Tires (65%)- Sold
Pro-comp Aluminum Wheels- Sold
Power Steering box- Sold
3-speed Trans w/ Floor Shift Kit- Sold
KC Lights- Sold
Smittybuilt Bumpers & Step Bars- Sold
Dana 44 w/ Mile Marker Hubs- Sold
9" Rear (I think they are 3.54 Gears)- Sold
Dana 20 T-case (T-style)- Sold
Drive Shafts- Sold
Two Doors- Sold
Tailgate - Sold
Hood- Sold
Soft Top- Sold
Tire Cover- Sold
Tire Carrier (swing out)- Sold
Fender Flares - Sold
Roll Cage - Sold
New - Body Mounts- Sold
New - T-case Mounts- Sold
New - Dana 20 Seal & Gasket Kit- Sold
New - 3rd Member Gaskets (both Dana 44 & 9")- Sold
Soft Top & Hardware- Sold
Dash- Sold
Dash Pad (Small crack in passanger side)- Sold
Wiper Motor & Arms- Sold
Power Brake Bracket, Booster, & Master Cylinder - Sold
Gas Tank- Sold
New - Trac Bar Mount- Sold
Two Steering Columns- Sold
Four Inch Tachometer - Sold
Grant 'Challenger' Steering Wheel- Sold
Interior Pedal Brackets- Sold
Heater Core- Sold
Long Tube Headers- Sold
Custom Flowmaster Dual Exhaust & H-pipe- Sold
Core Support - Sold
Radiator- Sold
Door Inserts- Sold
Headlights - Sold
1/2 Top or Sunshade- Sold
Rebuilt 302 'roller' (new bearing, rings, & oil Pump - block has 17K on it)
Water Pump - Sold
Alternator- Sold
Edelbrock Performer RPM Intake - Sold
Edelbrock 4-Barrel Carb- Sold
MSD Billet Distributor - Sold
MSD Ignition Box - Sold
Borg Warner HD Clutch- Sold

The other Bronco - Sold (old brown one-see pics) included with this deal is a 1976 with a 302, C4 automatic transmission, & Dana 20 J-style. The big deal here is that it has a fiberglass body. The tub, fenders, grill, & tailgate are all fiberglass. This body was put on around 2000. The bronco was running when it was parked. Again see pics at http://s1007.photobucket.com/albums/af196/jameshoyt/ Please emaill me with questions at jhoyt@rrienergy.com

Also may consider full or partial trade for Custom Triumph Motorcycle or Triumph Parts.

 

[dave vh]

hi u still have the fiberglass bronco ? if so , how much ? i am from lock haven pa. 17745 near williamsport . email me @ dvanhorn3@comcast.net thanks dave

 

[j-hoyt1]

I prefer to sell the whole lot, but the old fiberglass bronco should be worth 1500 bucks. I will defer to some one who makes an offer on the whole lot though. It is my preference to get rid of all of this at once. I think the whole lot should do 3,500 & up.

Thanks

 

[Explorer]

Got the title's?

 

[j-hoyt1]

Yes sir - titles for both. The seventy two is titled in my name, and the seventy-six is titled in another old boys name who sold it to me. i did not worry about transfering it b/c I was only in it for the body anyway. The title for the seventy-six is signed by the aforementioned old boy.
Thanks

 

[roccobronc80]

Doors

Wondering if doors are still avb. If so can you send me some good picture of them. jmcaulay80@gmail.com Thanks

 

[SteveL]

pm sent......

 

[74fiberglass]

So are you partin out or sellin as one . I interested what make lift , the bumpers and steps ,maybe soft top .Let me know as I am in Pa with cash if prices are right
Thankx Pete

 

[j-hoyt1]

The lift was made by a company called K bar S. They were a Bronco specific outfit out of Las Vegas. I beleive they are no longer in business. The bumpers & steps are smittybilt, and the top is Kayline. I have to wait for a few other responses, before I know these items are still available. Thanks

 

[j-hoyt1]

I have sent out communication to all of the interested parties regarding the parts they have requested prices on. If I missed anyone, please send me an email or PM. I am going to give them a couple of days to respond and then the whole lot is going to ebay. If you have any questions or would like info on any of the parts please do not hesistate to contact me. Thanks forr the interest.

 

[g8rb8t]

PM'd you...

 

[tasker]

have some intrest in the tub/bronco, have any detailed pics?

 

[CccBroncos]

what do you want for the rebuilt 302...what is the casting

 

[j-hoyt1]

$350

I am not sure where to get the casting number. The block is out of a 90s f-150, Mustang GT cam & heads, hypereutectic pistons, & roller lifters. The block should have about 17K on it. I gave it a freshening hone before reassembling. Should be a good engine for a long time.
Thanks

 

[Roadburner]

PM'd you

 

[Wyo4x4er]

Im interested in the door parts and guts including the wing window and the upper window frame. Price and shipping quote to 82070?

 

[stupidboy]

Looks like you decided to part it all out. If so I'm interested in the 72 title and glovebox door. Doors and tailgate also.

 

[mia73]

is the 76 available?

 

[Bassfisher]

How much for soft top and do you still have fiberglass body?
Thanks

 

[j-hoyt1]

Sorry for the delayed response. I have a buyer on the whole lot. Thanks for your interest. Good luck with your projects.