aliensecretion
Full Member
- Joined
- May 28, 2009
- Messages
- 323
Taking the Bronco in next week to get my old C4 swapped out. Don't know too much about transmissions so I'll describe it best I can. It leaks around the bell housing, sometimes slips when going into 2nd and makes a chunking sound when going into reverse that is louder when the truck's warm. Got a deal a while back on a rebuilt one so it works out better for me to swap than have the old one rebuilt.
Here's what I got to put in so I'm assuming the same stuff will come out and you can have it all. C4, Torque converter, dipstick and tube, C4 to dana 20 adapter and spud shaft, spud shaft bearing, bearing retainer. If you're interested, you're more than welcome to check it out still in the truck.
Pick up only please.
Here's what I got to put in so I'm assuming the same stuff will come out and you can have it all. C4, Torque converter, dipstick and tube, C4 to dana 20 adapter and spud shaft, spud shaft bearing, bearing retainer. If you're interested, you're more than welcome to check it out still in the truck.
Pick up only please.