• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Carb guru's

jeff68

Sr. Member
Joined
Oct 27, 2001
Messages
569
Loc.
Hattiesburg, MS.
I have an Edelbrock 600cfm carb on my 289ci (bored 30 over) and the cam was installed for low-end torque, every since I installed this carb it has dumped into the intake after I shut the engine down!
How do I stop this ? it is flooded if I try to re-start soon after shut down!
Any help would be greatly apperciated!
Jeff
 
G

Guest

Guest
Jest a guess, to get the ball rolling. are the floats adj right? Is it possible that you are expericing (sp) heat soak into the carb and the fule is boiling over? ???
 
OP
OP
J

jeff68

Sr. Member
Joined
Oct 27, 2001
Messages
569
Loc.
Hattiesburg, MS.
Thanks rocket dog,
It dosn't seem to be that the fuel is boiling, Maybe that the floats are not adjusted properly!
Any tips on adjusting the floats? I had a mechanic over-haul the engine,he also installed the carb! I have no instructions for this carb!
any help will be apperciated!
Jeff!
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
Do you have pressure in the tank? If not it sounds like the fuel is boiling in the carb, put a heat insulator between the carb and manifold
 
OP
OP
J

jeff68

Sr. Member
Joined
Oct 27, 2001
Messages
569
Loc.
Hattiesburg, MS.
Thanks guys,
This will give me somewhere to start, I would love to go with fuel injection but I am over my budget with the Axles being upgraded! maybe later !
Jeff
 
Top